

The 220 VAC SUNON DP200A-2123XSL.GN is a AC axial fan sized 200 mm for commercial refrigeration and refrigerator cooling. 21 W input is the defining electrical load in the supplied data. For project documentation, start with the supplied installation footprint. Reconcile the model code with the required electrical interface.
| Rated Voltage(V) | 220 |
|---|---|
| Size(mm) | 200 |
| Input Power(W) | 21 |
| Speed(rpm) | 3100 |
The DP200A-2123XSL.GN from SUNON addresses cooling needs in HVAC and ventilation equipment. As an AC axial fan, it creates a defined inlet-to-outlet route across the thermal load.
The AC motor format supports direct integration with the stated supply, while the exact bearing, frequency and protection configuration remain tied to the complete part number. The enclosure should direct air across the heat source because bypass flow can reduce cooling even when the fan runs normally.
DP200A-2123XSL.GN is best integrated with attention to grille resistance. Engineering teams can use thermal-load testing for service documentation to verify thermal suitability and give buyers an auditable selection basis. Account for the pressure loss introduced by guards and protective screens.
SUNON DP200A-2123XSL.GN serves HVAC equipment. Airflow around control and heat-exchange sections helps address continuous heating and cooling loads. The fan gives OEM equipment a defined air route and supports stable air-conditioning operation. It supports reliable equipment cooling.
SUNON DP200A-2123XSL.GN serves industrial ventilation systems. Airflow around equipment air passages and thermal assemblies helps address continuous airflow demand. The fan gives OEM equipment a defined air route and supports controlled air circulation.
SUNON DP200A-2123XSL.GN serves heat-exchange equipment. Airflow around coil and exchanger surfaces helps address transferred thermal energy. The fan gives OEM equipment a defined air route and supports effective heat rejection. It supports reliable equipment cooling.
Confirm any missing bearing, connector, control, IP rating, life, certification, and performance-curve details for the complete part number.
Speed-control capability is not stated for this complete part number. Confirm the signal and controller requirements before use.
Its documented 220 VAC rating and 21 w input is the defining electrical load in the supplied data. allow comparison with the required duty point without assuming unlisted options.
No noise value is supplied for this row; request model-specific acoustic data when noise limits matter.
The supplied product-line reference discusses long-life cooling, but continuous-duty limits for this full suffix must be verified from its datasheet and operating conditions.

DP200A 2123XBT.GN is a 220-240 VDC axial fan for servers, data-communications equipment, control cabinets. Its main supplied feature is 21 W input power for the listed electrical version. It also lists a 120*120*38 mm size specified in the upload data. Review procurement specification for motor selection.
Read More
DP201A 2123HBT.GN is a 220–240 VDC axial fan for servers, data-communications equipment, control cabinets. Its main supplied feature is 45 / 50 dB noise data recorded for this model. It also lists a 120×120×38 mm size specified in the upload data. Review system resistance for commissioning review.
Read More
DP200A 2123XBL.GN is a 220-240 VDC axial fan for servers, data-communications equipment, control cabinets. Its main supplied feature is 3150 rpm rated speed in the supplied parameter row. It also lists a 119x119x38.5 mm size specified in the upload data. Review duct connection for equipment design.
Read More
DP200A-2123HSL is a 220 VAC axial fan for servers, data-communications equipment, control cabinets. Its main supplied feature is axial airflow intended for low-to-moderate system resistance. It also lists a 120*120*38 mm size specified in the upload data. Review operating point for replacement review.
Read More
The DP200A-2123XBT.GN is SUNON's 220 VAC, 120 × 120 × 38 mm AC axial fan option for commercial refrigeration and refrigerator cooling. Up to 198.78 m³/h is its most prominent listed performance figure. Use the documented selection parameters when planning project documentation. Reconcile the model code with the required electrical interface.
Read More
For commercial refrigeration and refrigerator cooling, DP200A-2123XBL.GN combines 220 VAC operation with a 119 × 119 × 38.5 mm AC axial fan design. Up to 198.8 m³/h is its most prominent listed performance figure. Review its rated dataset during project documentation. Reconcile the model code with the required electrical interface.
Read More