HA40101V4-000U-999 SUNON Axial Fan

Brand :: SUNON

Model:: HA40101V4-000U-999 | SUNON 12V 0.38W 40x40x10mm 9.2m3/h DC Axial Fan for Industrial Cooling

Type:: Axial Fans

Industry:: Industrial Cooling

Description:: Within telecom cabinets, base stations, and network equipment, SUNON HA40101V4-000U-999 serves as a 40 × 40 × 10 mm DC axial fan operating at 12 VDC. A listed noise value of 15.7 dB is the model's key differentiator. Use the documented application data when planning airflow-path design. Obtain the applicable curve before final duty-point approval.

Datasheet:: HA40101V4-000U-999 | SUNON 12V 0.38W 40x40x10mm 9.2m3/h DC Axial Fan for Industrial Cooling Datasheet (Pdf)

Product Features

Rated Voltage(V)	12
Size(mm)	40x40x10mm
Max.Air Flow(m³/h)	9.2
Max.Pressure(Pa)	22.4
Input Power(W)	0.38
Speed(rpm)	5000
Noise(db)	15.7

Product Features

MagLev Cooling

Equipment builders can integrate SUNON HA40101V4-000U-999, a DC brushless axial fan, into industrial equipment. The design supplies the air movement required to carry component heat out of confined spaces.

The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. The enclosure should direct air across the heat source because bypass flow can reduce cooling even when the fan runs normally.

To integrate HA40101V4-000U-999 effectively, review outlet geometry at equipment level and arrange prototype trials during prototype approval. Confirmed system compatibility supports stable cooling and repeatable procurement. Use a representative assembly rather than an unrestricted bench setup.

Application Industry

Industrial Equipment

SUNON HA40101V4-000U-999 serves industrial machinery and electronic equipment. Airflow around controllers, drives and power devices helps address continuous internal heat. The fan gives OEM equipment a defined air route and supports stable equipment operation.

Frequently Asked Questions

What protection rating does HA40101V4-000U-999 have?

The exact IP or protection option is not stated in the supplied row. Confirm the full suffix in the applicable SUNON datasheet.

Is HA40101V4-000U-999 compatible with a replacement fan?

Match voltage, dimensions, mounting, airflow direction, airflow, pressure, connector, control signal, and protection before substitution.

Why choose HA40101V4-000U-999 over a general cooling fan?

Its documented 12 VDC rating and a listed noise value of 15.7 db is the model's key differentiator. allow comparison with the required duty point without assuming unlisted options.

What speed is listed for HA40101V4-000U-999?

The listed speed is 5000 rpm. Confirm frequency, control method, and duty point for the installed system.

What airflow value is listed for HA40101V4-000U-999?

The worksheet lists up to 9.2 m³/h. Verify the operating point against system resistance.

Does HA40101V4-000U-999 have a documented pressure rating?

Yes. The worksheet lists up to 22.4 Pa; compare it with the system curve.

Related Products

HA40101V4-000U-999 | SUNON 12VDC 0.38W 40x40x10mm DC Axial Fan for data center cooling

HA40101V4-000U-999 is a 12 VDC axial fan for servers, data-communications equipment, control cabinets. Its main supplied feature is axial airflow intended for low-to-moderate system resistance. It also lists a 40x40x10mm mm size specified in the upload data. Review cooling margin for replacement review.

HA40101V4-1000U-999 | SUNON 12V 0.38W 40x40x10mm 9.2m3/h DC Axial Fan for Industrial Cooling

Designed for telecom cabinets, base stations, and network equipment, SUNON HA40101V4-1000U-999 is a 12 VDC DC axial fan in a 40 × 40 × 10 mm frame. A listed noise value of 15.7 dB is the model's key differentiator. The recorded cooling specification should guide airflow-path design. Obtain the applicable curve before final duty-point approval.

HA40101V4-0000-999 | SUNON 12V 0.38W 40x40x10mm 9.2m3/h DC Axial Fan for Industrial Cooling

Within telecom cabinets, base stations, and network equipment, SUNON HA40101V4-0000-999 serves as a 40 × 40 × 10 mm DC axial fan operating at 12 VDC. A listed noise value of 15.7 dB is the model's key differentiator. Base reliability evaluation on the stated electrical load. Treat bearing and life data as suffix-specific.

HA40201V4-1000U-A99 | SUNON 12VDC 0.42W 40x40x20mm DC Axial Fan for data center cooling

HA40201V4-1000U-A99 is a 12 VDC axial fan for servers, data-communications equipment, control cabinets. Its main supplied feature is 0.42 W input power for the listed electrical version. It also lists a 40*40*20 mm size specified in the upload data. Review control method for replacement review.

HA40101V4-1000U-A99 | SUNON 12VDC 0.43W 40x40x10mm DC Axial Fan for data center cooling

HA40101V4-1000U-A99 is a 12 VDC axial fan for servers, data-communications equipment, control cabinets. Its main supplied feature is axial airflow intended for low-to-moderate system resistance. It also lists a 40*40*10 mm size specified in the upload data. Review acoustic limit for replacement review.

HA92251V4-10000-A99 | SUNON 12V 0.54W 92x92x25mm DC Axial Fan for Refrigeration Equipment

For airflow duties across telecom cabinets, base stations, and network equipment, the HA92251V4-10000-A99 provides a 12 VDC DC axial fan configuration measuring 92 × 92 × 25 mm. Its 1700 rpm rating defines a lower-speed operating point. Review its sound level during reliability evaluation. Treat bearing and life data as suffix-specific.

HA40101V4-000U-999 SUNON Axial Fan

Product Features

Product Features

MagLev Cooling

Application Industry

Industrial Equipment

Frequently Asked Questions

What protection rating does HA40101V4-000U-999 have?

Is HA40101V4-000U-999 compatible with a replacement fan?

Why choose HA40101V4-000U-999 over a general cooling fan?

What speed is listed for HA40101V4-000U-999?

What airflow value is listed for HA40101V4-000U-999?

Does HA40101V4-000U-999 have a documented pressure rating?

Related Products

HA40101V4-000U-999 | SUNON 12VDC 0.38W 40x40x10mm DC Axial Fan for data center cooling

HA40101V4-1000U-999 | SUNON 12V 0.38W 40x40x10mm 9.2m3/h DC Axial Fan for Industrial Cooling

HA40101V4-0000-999 | SUNON 12V 0.38W 40x40x10mm 9.2m3/h DC Axial Fan for Industrial Cooling

HA40201V4-1000U-A99 | SUNON 12VDC 0.42W 40x40x20mm DC Axial Fan for data center cooling

HA40101V4-1000U-A99 | SUNON 12VDC 0.43W 40x40x10mm DC Axial Fan for data center cooling

HA92251V4-10000-A99 | SUNON 12V 0.54W 92x92x25mm DC Axial Fan for Refrigeration Equipment

Message Form