

A 9000 rpm rotor is the defining point of AFB0612DH-AF00 in the 60 mm server-cooling range. This 12VDC axial fan also lists 230.7 Pa maximum pressure; the AF00 suffix remains part of the purchase specification.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 60*60*25 |
| Max.Air Flow(m³/h) | 85.68 |
| Max.Pressure(Pa) | 230.7 |
| Input Power(W) | 10.08 |
| Speed(rpm) | 9000 |
| Noise(db) | 55 |
For industrial control equipment, the AFB0612DH-AF00 from Delta is a brushless DC axial fan that supports active thermal management. A planned inlet-to-outlet route helps the installation carry component heat away.
The 12 V DC supply requirement gives electrical designers a clear basis for matching the fan to the equipment power architecture. The series combines ball-bearing construction with UL 94V-0 materials, addressing mechanical durability and component flammability requirements. The mounting arrangement and duct transitions should preserve the intended air path so cooling is not lost to leakage or recirculation.
It suits engineering buyers who need a defined cooling component. Verify the exact wiring and environmental limits before approving long-term installation.
Delta AFB0612DH-AF00 serves server and storage equipment, helping remove heat from processors, drives and other heat-producing assemblies. Airflow supports stable equipment temperatures.
In power-supply equipment, Delta AFB0612DH-AF00 helps remove heat from power-conversion components. The cooling solution addresses electrical conversion losses to support dependable power delivery.
For telecommunications equipment, Delta AFB0612DH-AF00 provides equipment cooling around densely arranged electronic assemblies. Managing continuous communication duty helps maintain service continuity.
In industrial control equipment, air movement helps handle heat accumulated within enclosures. Delta AFB0612DH-AF00 supports cooling around controllers and electronic modules, contributing to stable automation operation.
The listed noise value is 55 dB, but compare values only under matching test conditions. Installed noise also depends on speed, restriction, resonance and enclosure geometry.
12VDC is listed for AFB0612DH-AF00. Verify the allowable input range, phase, frequency where applicable, polarity and wiring diagram in the exact specification.
AFB0612DH-AF00 is listed for Server and Power Supply cooling. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.
9000 rpm is listed in the workbook. This value alone does not establish adjustable-speed capability; confirm the control input and permitted operating range in the exact datasheet.
The filter data does not confirm a control interface. Check the exact-model datasheet and wiring for PWM, analog control, FG/RD feedback or fixed-speed operation before connection.
Serviceability depends on access, connector choice and mounting. Plan isolation and cleaning access, inspect the airflow path, and use the manufacturer's replacement guidance rather than attempting an unsupported repair.

A 1.44 W input makes AFB0624MB a lower-input entry among the listed 24VDC axial fan fans. For server and power-supply ventilation, it provides a 60 x 60 x 15 mm format with a specified 4000 rpm rotor.
Read More
AFB0612HH-A combines a 5000 rpm rotor with a 12VDC axial fan motor for server and power-supply cooling. Its listed 2.04 W input and 74 Pa maximum static pressure accompany a 60 x 60 x 25.4 mm frame.
Read More
AFB1224GHE-C is a 24VDC axial fan for server chassis, with 409.7 m3/h listed maximum airflow. Its 27.6 W input differs from the 12VDC GHE entry; retain the -C suffix when checking connector and control configuration.
Read More
AFB0912HH supports storage-enclosure cooling with a 12VDC axial fan design. At 3200 rpm and 3 W listed input, it represents a distinct operating choice among the supplied 92 mm fans, with a specified 25.4 mm depth.
Read More
Server chassis with space for a 38 mm-deep fan can consider AFB0824SHE, an 80 mm axial model powered by 24VDC. Its listed airflow ceiling is 123.6 m3/h, a useful comparison point for enclosure ventilation designs.
Read More
A deeper 70 x 70 x 38 mm frame distinguishes AFB0712VHE for server and power-supply cooling. The 12VDC axial fan lists 7000 rpm operation and 216.7 Pa maximum pressure, with an 8.4 W input rating.
Read More