

Suited to Telecom, ebm-papst R1G220-AB35-52 is a 24 V EC forward-curved centrifugal fan, noted for a documented speed of 3,150 rpm. The data supports model-level evaluation. Its documented data supports integration planning.
| Rated Voltage(V) | 24 |
|---|---|
| Size(mm) | 220 |
| Max.Air Flow(m³/h) | 1055 |
| Max.Pressure(Pa) | 700 |
| Input Power(W) | 106 |
| Speed(rpm) | 3150 |
| Noise(db) | 76 |
The ebm-papst R1G220-AB35-52 is an EC centrifugal fan for Telecommunications, combining application-focused airflow with practical integration criteria. It serves equipment manufacturers and maintenance teams that require traceable model selection.
Documented selection points include 24 V supply, 106 W input, 220 mm size, up to 1055 m3/h airflow. These values support electrical, envelope and duty-point comparison.
For procurement, verify voltage, duty point, dimensions, connector and mounting. Correct sizing and clear airflow paths support stable operation, controlled noise and long service life. Confirm speed control, IP protection and approvals in the exact-model datasheet. This approach helps OEMs reduce integration risk and plan dependable thermal performance.
Suited to telecom base stations and network equipment, where continuous electronics generate concentrated heat. It supports cabinet airflow, temperature control and dependable communications service.
Designed for electrical cabinets and control enclosures, helping circulate air around heat-producing components. This cooling solution supports stable equipment operation and easier thermal management.
The ebm-papst R1G220-AB35-52 from the EC Centrifugal series is a direct energy-saving replacement for legacy AC fans including R2D. Key benefits:
R1G EC fans operate at V with W rated power. When replacing AC models, wire the 0-10V control signal alongside the standard three-phase power cable.
How the R1G220-AB35-52 compares to nearby R1G series variants:
| Model | R1G175-AB41-02 | R1G175-AB41-34 | R1G175-AB41-64 | R1G220-AB35-52 |
|---|---|---|---|---|
| Air Flow | 625 m³/h | — | — | 1055 m³/h |
| Power | 40 W | 34 W | 34 W | 106 W |
| Noise | — dB | — dB | — dB | 76 dB |
| Size | 175 mm | 175 mm | 175 mm | 220 mm |
All R1G series fans from Hengrui include performance curves, mounting instructions and factory warranty. Contact us for project-specific selection.
Data Center CRAH/CRAC Units: The R1G220-AB35-52 delivers reliable cooling for Computer Room Air Handling with 24/7 uptime. EC motor enables precise temperature control.
AHU Air Handling: Engineered for integration into Air Handling Units.
Industrial Process Ventilation: Machinery cooling, enclosure ventilation and process air movement. Hengrui provides custom engineering support.
The supplied comparison identifies a documented speed of 3,150 rpm; review it together with the other listed ratings rather than as a standalone selection criterion.
Control capability and input method must be confirmed in the exact-model datasheet and wiring diagram; do not infer them from the fan family alone.
Provide service access, keep the airflow path clean, inspect wiring and mounting, and investigate abnormal noise or vibration before continued use.

Designed for Air Purification, the ebm-papst R3G225-8317084118 is a 200-277V EC backward-curved centrifugal fan, defined by 225 mm dimensions for installation planning. The data helps compare K-series variants.
Read More
In Cleanroom equipment, R3G280-8317084540 is an EC backward-curved centrifugal fan whose documented profile includes 280 mm dimensions for installation planning; the supplied table leaves the rated voltage unspecified.
Read More
The R3G310-8317083844 serves Cleanroom as an EC backward-curved centrifugal fan, with 310 mm dimensions for installation planning as its clearest supplied attribute. No rated voltage is listed in the provided table.
Read More
For Cleanroom, R3G400-8317084403 provides an EC backward-curved centrifugal fan format with 400 mm dimensions for installation planning. Rated voltage is not shown in the supplied table and must be checked before selection.
Read More
Intended for Cleanroom, the R3G400-8317080005 is an EC backward-curved centrifugal fan characterized by 400 mm dimensions for installation planning. Its rated voltage is absent from the supplied data and requires confirmation.
Read More
Specified as an EC backward-curved centrifugal fan for Cleanroom, R3G355-8317084543 is distinguished by 355 mm dimensions for installation planning. Confirm rated voltage separately because it is not present in the supplied table.
Read More