

SUNON EE60251B3-000U-A99 combines a 60 × 60 × 25 mm DC blower platform with a 12 VDC rating for telecom cabinets, base stations, and network equipment. 19.9 Pa maximum pressure is the standout documented duty-point value. During controller selection, compare the model's dimensional envelope. Treat bearing and life data as suffix-specific.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 60x60x25mm |
| Max.Pressure(Pa) | 19.9 |
| Input Power(W) | 0.7 |
| Speed(rpm) | 3000 |
For industrial equipment, SUNON EE60251B3-000U-A99 serves as a DC brushless axial fan. The fan supports temperature control in equipment that runs through sustained or repeated duty cycles.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. The enclosure should direct air across the heat source because bypass flow can reduce cooling even when the fan runs normally.
System designers selecting EE60251B3-000U-A99 should account for filter loading, then schedule maintenance planning during prototype approval. This approach links equipment cooling needs with practical procurement and service decisions. Define cleaning and inspection intervals around the actual duty cycle.
Verify supply, wiring, obstructions, impeller movement, and protection status. Use the model datasheet before replacement or repair.
Yes. The worksheet lists up to 19.9 Pa; compare it with the system curve.
The worksheet lists 0.7 W input. Check supply capacity and operating conditions before commissioning.
Assess reliability from the exact bearing, temperature, protection, and life data. The supplied series note alone does not confirm every suffix-specific option.
Confirm any missing bearing, connector, control, IP rating, life, certification, and performance-curve details for the complete part number.
Inspect for dust, blocked airflow, abnormal noise, loose mounting, and wiring damage. Isolate power before cleaning or service.

The EE80251B3-000U-A99 is SUNON's 12 VDC, 80 × 80 × 25 mm DC blower option for telecom cabinets, base stations, and network equipment. Its 2600 rpm rating defines a lower-speed operating point. Base mounting verification on the stated acoustic value. Validate mounting and wiring from the model drawing.
Read More
SUNON EE80252B1-000U-A99 combines a 80 × 80 × 25 mm DC blower platform with a 24 VDC rating for telecom cabinets, base stations, and network equipment. Its 3200 rpm rating defines a lower-speed operating point. Use the documented technical profile when planning wiring review. Confirm environmental protection for the ordered version.
Read More
For airflow duties across telecom cabinets, base stations, and network equipment, the EE80252BX-000U-A99 provides a 24 VDC DC blower configuration measuring 80 × 80 × 25 mm. Its 3600 rpm rating defines a lower-speed operating point. The recorded duty-point values should guide wiring review. Confirm environmental protection for the ordered version.
Read More
Within telecom cabinets, base stations, and network equipment, SUNON EE60252B1-000U-A99 serves as a 60 × 60 × 25 mm DC blower operating at 24 VDC. Its 39.9 m³/h airflow rating suits the stated equipment-cooling role. For wiring review, start with the supplied sound level. Confirm environmental protection for the ordered version.
Read More
Within telecom cabinets, base stations, and network equipment, SUNON EE92251BX-000U-A99 serves as a 92 × 92 × 25 mm DC blower operating at 12 VDC. Up to 93.4 m³/h is its most prominent listed performance figure. The recorded pressure capability should guide wiring review. Confirm environmental protection for the ordered version.
Read More
The 60 × 60 × 25 mm EE60251B1-000U-A99 brings 12 VDC DC blower cooling to telecom cabinets, base stations, and network equipment. A listed input of 1.44 W is the model's notable electrical characteristic. Use the documented equipment fit when planning mounting verification. Validate mounting and wiring from the model drawing.
Read More