

Used in telecom cabinets, base stations, and network equipment, SUNON EF50101B2-C041-S99 is a 12 VDC DC blower in a 50 × 50 × 10 mm frame. A listed input of 1.44 W is the model's notable electrical characteristic. The recorded acoustic value should guide controller selection. Treat bearing and life data as suffix-specific.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 50*50*10 |
| Input Power(W) | 1.44 |
The SUNON EF50101B2-C041-S99 positions a DC brushless axial fan for industrial equipment. Its airflow path supports heat removal from enclosed components and toward the equipment exhaust.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. The enclosure should direct air across the heat source because bypass flow can reduce cooling even when the fan runs normally.
EF50101B2-C041-S99 is best integrated with attention to grille resistance. Engineering teams can use maintenance planning during prototype approval to verify thermal suitability and give buyers an auditable selection basis. Account for the pressure loss introduced by guards and protective screens.
The worksheet lists 1.44 W input. Check supply capacity and operating conditions before commissioning.
Assess reliability from the exact bearing, temperature, protection, and life data. The supplied series note alone does not confirm every suffix-specific option.
The exact IP or protection option is not stated in the supplied row. Confirm the full suffix in the applicable SUNON datasheet.
Match voltage, dimensions, mounting, airflow direction, airflow, pressure, connector, control signal, and protection before substitution.
Its documented 12 VDC rating and a listed input of 1.44 w is the model's notable electrical characteristic. allow comparison with the required duty point without assuming unlisted options.

Built for telecom cabinets, base stations, and network equipment, SUNON EF80152B1-EE070-S99 uses a 80 × 80 × 15 mm DC blower arrangement at 24 VDC. 2.16 W input is the defining electrical load in the supplied data. Treat the frame geometry as a primary input to wiring review. Confirm environmental protection for the ordered version.
Read More
Within telecom cabinets, base stations, and network equipment, SUNON EF40100B1-1Q00-S99 serves as a 40 × 40 × 10 mm DC blower operating at 12 VDC. Its 40 × 40 × 10 mm format is the main stated selection detail. Use the documented frame geometry when planning controller selection. Treat bearing and life data as suffix-specific.
Read More
SUNON EF40101B2-1C020-S99 combines a 40 × 40 × 10 mm DC axial fan platform with a 12 VDC rating for telecom cabinets, base stations, and network equipment. A listed noise value of 17.7 dB is the model's key differentiator. Base mounting verification on the stated technical profile. Validate mounting and wiring from the model drawing.
Read More
The EF40201BX-1Q140-S99 is SUNON's 12 VDC, 40 × 40 × 20 mm DC axial fan option for telecom cabinets, base stations, and network equipment. 8200 rpm is the model's most distinctive operating parameter. Use the documented cooling specification when planning mounting verification. Validate mounting and wiring from the model drawing.
Read More
The 12 VDC SUNON EF60151BX-Q010-S99 is a DC blower sized 60 × 60 × 15 mm for servers and data-center electronics. A listed input of 1.44 W is the model's notable electrical characteristic. For mounting verification, start with the supplied supply requirement. Validate mounting and wiring from the model drawing.
Read More
The EF40101B1-1Q070-S99 is SUNON's 12 VDC, 40 × 40 × 10 mm DC axial fan option for telecom cabinets, base stations, and network equipment. Its 13.6 m³/h airflow rating suits the stated equipment-cooling role. Treat the model record as a primary input to airflow-path design. Obtain the applicable curve before final duty-point approval.
Read More