

Designed for telecom cabinets, base stations, and network equipment, SUNON HA40101V4-1000U-999 is a 12 VDC DC axial fan in a 40 × 40 × 10 mm frame. A listed noise value of 15.7 dB is the model's key differentiator. The recorded cooling specification should guide airflow-path design. Obtain the applicable curve before final duty-point approval.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 40x40x10mm |
| Max.Air Flow(m³/h) | 9.2 |
| Max.Pressure(Pa) | 22.4 |
| Input Power(W) | 0.38 |
| Speed(rpm) | 5000 |
| Noise(db) | 15.7 |
SUNON HA40101V4-1000U-999 is a DC brushless axial fan for industrial equipment. It establishes forced airflow where passive cooling cannot adequately protect heat-producing assemblies.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. The enclosure should direct air across the heat source because bypass flow can reduce cooling even when the fan runs normally.
A dependable HA40101V4-1000U-999 installation starts with a review of exhaust separation. Complete prototype trials during prototype approval to confirm compatibility, operating margin and the information needed for repeat orders. Separate discharge air from the intake path inside the finished enclosure.
The listed speed is 5000 rpm. Confirm frequency, control method, and duty point for the installed system.
The supplied product-line reference discusses long-life cooling, but continuous-duty limits for this full suffix must be verified from its datasheet and operating conditions.
Keep the airflow path clear, secure the frame without distortion, and follow the exact wiring diagram and voltage rating.
Use the listed voltage, size, 9.2 m³/h airflow, 5000 rpm, and 0.38 W input for preliminary comparison.
Assess reliability from the exact bearing, temperature, protection, and life data. The supplied series note alone does not confirm every suffix-specific option.

HA40101V4-000U-999 is a 12 VDC axial fan for servers, data-communications equipment, control cabinets. Its main supplied feature is axial airflow intended for low-to-moderate system resistance. It also lists a 40x40x10mm mm size specified in the upload data. Review cooling margin for replacement review.
Read More
Within telecom cabinets, base stations, and network equipment, SUNON HA40101V4-000U-999 serves as a 40 × 40 × 10 mm DC axial fan operating at 12 VDC. A listed noise value of 15.7 dB is the model's key differentiator. Use the documented application data when planning airflow-path design. Obtain the applicable curve before final duty-point approval.
Read More
Within telecom cabinets, base stations, and network equipment, SUNON HA40101V4-0000-999 serves as a 40 × 40 × 10 mm DC axial fan operating at 12 VDC. A listed noise value of 15.7 dB is the model's key differentiator. Base reliability evaluation on the stated electrical load. Treat bearing and life data as suffix-specific.
Read More
HA40201V4-1000U-A99 is a 12 VDC axial fan for servers, data-communications equipment, control cabinets. Its main supplied feature is 0.42 W input power for the listed electrical version. It also lists a 40*40*20 mm size specified in the upload data. Review control method for replacement review.
Read More
HA40101V4-1000U-A99 is a 12 VDC axial fan for servers, data-communications equipment, control cabinets. Its main supplied feature is axial airflow intended for low-to-moderate system resistance. It also lists a 40*40*10 mm size specified in the upload data. Review acoustic limit for replacement review.
Read More
For airflow duties across telecom cabinets, base stations, and network equipment, the HA92251V4-10000-A99 provides a 12 VDC DC axial fan configuration measuring 92 × 92 × 25 mm. Its 1700 rpm rating defines a lower-speed operating point. Review its sound level during reliability evaluation. Treat bearing and life data as suffix-specific.
Read More