KD1204PFB3 SUNON Axial Fan

Brand :: SUNON

Model:: KD1204PFB3 | SUNON 12V 0.86W 40x40x10mm DC Axial Fan for Industrial Cooling

Type:: Axial Fans

Industry:: Industrial Cooling

Description:: Within industrial electronics and equipment cooling, SUNON KD1204PFB3 serves as a 40 × 40 × 10 mm DC blower operating at 12 VDC. A listed input of 0.86 W is the model's notable electrical characteristic. Review its supply requirement during controller selection. Treat bearing and life data as suffix-specific.

Datasheet:: KD1204PFB3 | SUNON 12V 0.86W 40x40x10mm DC Axial Fan for Industrial Cooling Datasheet (Pdf)

Product Features

Rated Voltage(V)	12
Size(mm)	404010
Input Power(W)	0.86

Product Features

Reliable Fan Cooling

Equipment builders can integrate SUNON KD1204PFB3, a DC brushless axial fan, into industrial equipment. The design supplies the air movement required to carry component heat out of confined spaces.

The exact fan curve should be reviewed against filters, guards and enclosure resistance so the selected operating point meets the required cooling load. The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market.

KD1204PFB3 is best integrated with attention to grille resistance. Engineering teams can use duty-point validation before ordering to verify thermal suitability and give buyers an auditable selection basis. Record the intended operating point on the system resistance curve.

Application Industry

Industrial Equipment

SUNON KD1204PFB3 serves industrial machinery and electronic equipment. Airflow around controllers, drives and power devices helps address continuous internal heat. The fan gives OEM equipment a defined air route and supports stable equipment operation.

Frequently Asked Questions

How is KD1204PFB3 electrically connected?

The supplied row does not state the connector or lead configuration. Follow the model-specific wiring drawing.

Does KD1204PFB3 support speed control?

Speed-control capability is not stated for this complete part number. Confirm the signal and controller requirements before use.

How can KD1204PFB3 affect operating cost?

Compare its listed 0.86 W input with the required airflow and run time. Total savings depend on the complete system duty point.

What speed is listed for KD1204PFB3?

No speed value is supplied for this complete model.

What should be checked if KD1204PFB3 stops?

Verify supply, wiring, obstructions, impeller movement, and protection status. Use the model datasheet before replacement or repair.

What installation checks apply to KD1204PFB3?

Keep the airflow path clear, secure the frame without distortion, and follow the exact wiring diagram and voltage rating.

Related Products

KD1204PFB2 | SUNON 12V 1.1W 40x40x10mm 11.05m3/h 6600rpm DC Axial Fan for Industrial Cooling

For compact cooling within industrial electronics and equipment cooling, the KD1204PFB2 provides a 12 VDC DC blower configuration measuring 40 × 40 × 10 mm. Its 11.05 m³/h airflow rating suits the stated equipment-cooling role. The recorded frame geometry should guide mounting verification. Validate mounting and wiring from the model drawing.

KD1204PFB3(7cm) | SUNON 12V 0.86W 40x40x10mm DC Axial Fan for Industrial Cooling

Engineered for industrial electronics and equipment cooling, SUNON KD1204PFB3(7cm) is a 12 VDC DC blower in a 40 × 40 × 10 mm frame. A listed input of 0.86 W is the model's notable electrical characteristic. Use the documented operating point when planning mounting verification. Validate mounting and wiring from the model drawing.

KD2408PTB1-6 | SUNON 24V 2.9W 80x80x25mm DC Axial Fan for Industrial Cooling

The KD2408PTB1-6 is SUNON's 24 VDC, 80 × 80 × 25 mm DC blower option for industrial electronics and equipment cooling. 2.9 W input is the defining electrical load in the supplied data. During specification approval, compare the model's model record. Check the ordering suffix before assigning control functions.

KD1208PTB1-6 | SUNON 12V 2.6W 80x80x25mm DC Axial Fan for Industrial Cooling

The 12 VDC SUNON KD1208PTB1-6 is a DC blower sized 80 × 80 × 25 mm for industrial electronics and equipment cooling. 2.6 W input is the defining electrical load in the supplied data. Treat the installation footprint as a primary input to specification approval. Check the ordering suffix before assigning control functions.

KD2406PHB2 | SUNON 24V 1.9W 60x60x15mm 31.45m3/h 4200rpm DC Axial Fan for Industrial Cooling

For industrial electronics and equipment cooling, KD2406PHB2 combines 24 VDC operation with a 60 × 60 × 15 mm DC blower design. 37.4 Pa maximum pressure is the standout documented duty-point value. During specification approval, compare the model's rated dataset. Check the ordering suffix before assigning control functions.

KD2406PTS1 | SUNON 24V 2.6W 60x60x25mm 39.93m3/h DC Axial Fan for Industrial Cooling

Built for industrial electronics and equipment cooling, SUNON KD2406PTS1 uses a 60 × 60 × 25 mm DC blower arrangement at 24 VDC. Its 39.93 m³/h airflow rating suits the stated equipment-cooling role. Review its suffix definition during specification approval. Check the ordering suffix before assigning control functions.

KD1204PFB3 SUNON Axial Fan

Product Features

Product Features

Reliable Fan Cooling

Application Industry

Industrial Equipment

Frequently Asked Questions

How is KD1204PFB3 electrically connected?

Does KD1204PFB3 support speed control?

How can KD1204PFB3 affect operating cost?

What speed is listed for KD1204PFB3?

What should be checked if KD1204PFB3 stops?

What installation checks apply to KD1204PFB3?

Related Products

KD1204PFB2 | SUNON 12V 1.1W 40x40x10mm 11.05m3/h 6600rpm DC Axial Fan for Industrial Cooling

KD1204PFB3(7cm) | SUNON 12V 0.86W 40x40x10mm DC Axial Fan for Industrial Cooling

KD2408PTB1-6 | SUNON 24V 2.9W 80x80x25mm DC Axial Fan for Industrial Cooling

KD1208PTB1-6 | SUNON 12V 2.6W 80x80x25mm DC Axial Fan for Industrial Cooling

KD2406PHB2 | SUNON 24V 1.9W 60x60x15mm 31.45m3/h 4200rpm DC Axial Fan for Industrial Cooling

KD2406PTS1 | SUNON 24V 2.6W 60x60x25mm 39.93m3/h DC Axial Fan for Industrial Cooling

Message Form