

For compact cooling within telecom cabinets and network equipment, the MF20060V3-1Q12C-GA9 provides a 5 VDC DC axial fan configuration measuring 20 × 20 × 6 mm. A listed input of 0.1 W is the model's notable electrical characteristic. For controller selection, start with the supplied rated dataset. Treat bearing and life data as suffix-specific.
| Rated Voltage(V) | 5 |
|---|---|
| Size(mm) | 20x20x6mm |
| Max.Air Flow(m³/h) | 0.5 |
| Max.Pressure(Pa) | 7.5 |
| Input Power(W) | 0.1 |
| Speed(rpm) | 6200 |
| Noise(db) | 4.2 |
The MF20060V3-1Q12C-GA9 from SUNON addresses cooling needs in telecommunications equipment. As a DC brushless axial fan, it creates a defined inlet-to-outlet route across the thermal load.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. Correct airflow direction and inlet clearance help translate the documented operating point into reliable equipment-level cooling.
OEM teams specifying MF20060V3-1Q12C-GA9 should check airflow direction and complete thermal-load testing before ordering. A documented interface review helps purchasing teams control fit, cooling continuity and replacement planning. Verify orientation so heated air does not recirculate through the inlet.
SUNON MF20060V3-1Q12C-GA9 serves security-camera equipment. Airflow around image sensors, processors and power circuits helps address heat inside compact camera housings. The fan gives OEM equipment a defined air route and supports stable video operation.
SUNON MF20060V3-1Q12C-GA9 serves video-recording equipment. Airflow around storage, processing and power assemblies helps address continuous recording workloads. The fan gives OEM equipment a defined air route and supports reliable monitoring service.
SUNON MF20060V3-1Q12C-GA9 serves security monitoring systems. Airflow around network and control electronics helps address round-the-clock equipment heat. The fan gives OEM equipment a defined air route and supports system availability. It supports reliable equipment cooling.
The exact IP or protection option is not stated in the supplied row. Confirm the full suffix in the applicable SUNON datasheet.
Inspect for dust, blocked airflow, abnormal noise, loose mounting, and wiring damage. Isolate power before cleaning or service.
Compare its listed 0.1 W input with the required airflow and run time. Total savings depend on the complete system duty point.
The listed rating is 5 VDC. Verify polarity or mains frequency, wiring, and protection before commissioning.
The worksheet lists up to 0.5 m³/h. Verify the operating point against system resistance.

The MF30060V2-10000-A99 is SUNON's 5 VDC, 30 × 30 × 6 mm DC axial fan option for telecom cabinets and network equipment. A listed input of 0.36 W is the model's notable electrical characteristic. Use the documented operating point when planning compatibility checking. Reconcile the model code with the required electrical interface.
Read More
SUNON configures MF30060V1-10000-A99 as a 30 × 30 × 6 mm DC axial fan for telecom cabinets and network equipment, operating at 5 VDC. Its 8.3 m³/h airflow rating suits the stated equipment-cooling role. Review its pressure capability during compatibility checking. Reconcile the model code with the required electrical interface.
Read More
Within telecom cabinets and network equipment, MF25150V3-10000-A99 provides a 25 × 25 × 15 mm, 5 VDC DC axial fan configuration. A listed input of 0.18 W is the model's notable electrical characteristic. Treat the dimensional envelope as a primary input to compatibility checking. Reconcile the model code with the required electrical interface.
Read More
Designed for telecom cabinets and network equipment, SUNON MF25150V2-10000-A99 is a 5 VDC DC axial fan in a 25 × 25 × 15 mm frame. A listed input of 0.23 W is the model's notable electrical characteristic. Base compatibility checking on the stated acoustic value. Reconcile the model code with the required electrical interface.
Read More
Within telecom cabinets and network equipment, SUNON MF25150V1-10000-A99 serves as a 25 × 25 × 15 mm DC axial fan operating at 5 VDC. Its 5.3 m³/h airflow rating suits the stated equipment-cooling role. During compatibility checking, compare the model's electrical load. Reconcile the model code with the required electrical interface.
Read More
For telecom cabinets and network equipment, MF25101V3-10000-A99 combines 12 VDC operation with a 25 × 25 × 10 mm DC axial fan design. A listed input of 0.21 W is the model's notable electrical characteristic. The recorded speed benchmark should guide compatibility checking. Reconcile the model code with the required electrical interface.
Read More