

SUNON configures MF30101V1-1000U-S99 as a 30 × 30 × 10 mm DC axial fan for inverters, energy-storage systems, and charging equipment, operating at 12 VDC. 11500 rpm is the model's most distinctive operating parameter. Base controller selection on the stated pressure capability. Treat bearing and life data as suffix-specific.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 30x30x10mm |
| Max.Air Flow(m³/h) | 9.3 |
| Max.Pressure(Pa) | 62.3 |
| Input Power(W) | 0.66 |
| Speed(rpm) | 11500 |
| Noise(db) | 23 |
SUNON MF30101V1-1000U-S99 brings active air movement to new-energy power equipment. This DC brushless axial fan helps equipment designers control thermal conditions around densely arranged parts.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. The enclosure should direct air across the heat source because bypass flow can reduce cooling even when the fan runs normally.
A dependable MF30101V1-1000U-S99 installation starts with a review of exhaust separation. Complete maintenance planning during prototype approval to confirm compatibility, operating margin and the information needed for repeat orders. Separate discharge air from the intake path inside the finished enclosure.
SUNON MF30101V1-1000U-S99 serves energy-storage systems. Airflow around battery-control and power-conversion assemblies helps address charging and discharging losses. The fan gives OEM equipment a defined air route and supports stable ESS operation. It supports reliable equipment cooling.
SUNON MF30101V1-1000U-S99 serves photovoltaic inverters. Airflow around switching devices and control electronics helps address solar power-conversion heat. The fan gives OEM equipment a defined air route and supports dependable inverter duty. It supports reliable equipment cooling.
SUNON MF30101V1-1000U-S99 serves electric-vehicle charging equipment. Airflow around power modules and control assemblies helps address high charging loads. The fan gives OEM equipment a defined air route and supports reliable charging operation. It supports reliable equipment cooling.
Assess reliability from the exact bearing, temperature, protection, and life data. The supplied series note alone does not confirm every suffix-specific option.
The exact IP or protection option is not stated in the supplied row. Confirm the full suffix in the applicable SUNON datasheet.
Match voltage, dimensions, mounting, airflow direction, airflow, pressure, connector, control signal, and protection before substitution.
Its documented 12 VDC rating and 11500 rpm is the model's most distinctive operating parameter. allow comparison with the required duty point without assuming unlisted options.
The worksheet lists 23 dB. Installation distance, airflow resistance, and enclosure acoustics can change the measured result.

Positioned for telecom cabinets and network equipment, SUNON MF40060V1-1000U-S99 is a 5 VDC DC axial fan in a 40 × 40 × 6 mm frame. A listed input of 0.44 W is the model's notable electrical characteristic. Treat the power demand as a primary input to airflow-path design. Obtain the applicable curve before final duty-point approval.
Read More
The MF30060V2-10000-A99 is SUNON's 5 VDC, 30 × 30 × 6 mm DC axial fan option for telecom cabinets and network equipment. A listed input of 0.36 W is the model's notable electrical characteristic. Use the documented operating point when planning compatibility checking. Reconcile the model code with the required electrical interface.
Read More
SUNON configures MF30060V1-10000-A99 as a 30 × 30 × 6 mm DC axial fan for telecom cabinets and network equipment, operating at 5 VDC. Its 8.3 m³/h airflow rating suits the stated equipment-cooling role. Review its pressure capability during compatibility checking. Reconcile the model code with the required electrical interface.
Read More
Within telecom cabinets and network equipment, MF25150V3-10000-A99 provides a 25 × 25 × 15 mm, 5 VDC DC axial fan configuration. A listed input of 0.18 W is the model's notable electrical characteristic. Treat the dimensional envelope as a primary input to compatibility checking. Reconcile the model code with the required electrical interface.
Read More
Designed for telecom cabinets and network equipment, SUNON MF25150V2-10000-A99 is a 5 VDC DC axial fan in a 25 × 25 × 15 mm frame. A listed input of 0.23 W is the model's notable electrical characteristic. Base compatibility checking on the stated acoustic value. Reconcile the model code with the required electrical interface.
Read More
Within telecom cabinets and network equipment, SUNON MF25150V1-10000-A99 serves as a 25 × 25 × 15 mm DC axial fan operating at 5 VDC. Its 5.3 m³/h airflow rating suits the stated equipment-cooling role. During compatibility checking, compare the model's electrical load. Reconcile the model code with the required electrical interface.
Read More