

Sized for telecom cabinets and network equipment, SUNON MF35101V3-1D01-A99 is a 12 VDC DC axial fan in a 35 × 35 × 10 mm frame. A listed input of 0.24 W is the model's notable electrical characteristic. Use the documented mounting size when planning controller selection. Treat bearing and life data as suffix-specific.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 35x35x10mm |
| Max.Air Flow(m³/h) | 6.1 |
| Max.Pressure(Pa) | 17.4 |
| Input Power(W) | 0.24 |
| Speed(rpm) | 5000 |
| Noise(db) | 12 |
The MF35101V3-1D01-A99 from SUNON addresses cooling needs in telecommunications equipment. As a DC brushless axial fan, it creates a defined inlet-to-outlet route across the thermal load.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. Correct airflow direction and inlet clearance help translate the documented operating point into reliable equipment-level cooling.
System designers selecting MF35101V3-1D01-A99 should account for filter loading, then schedule duty-point validation before ordering. This approach links equipment cooling needs with practical procurement and service decisions. Allow operating margin for dust accumulation across the selected filter.
SUNON MF35101V3-1D01-A99 serves security-camera equipment. Airflow around image sensors, processors and power circuits helps address heat inside compact camera housings. The fan gives OEM equipment a defined air route and supports stable video operation.
SUNON MF35101V3-1D01-A99 serves video-recording equipment. Airflow around storage, processing and power assemblies helps address continuous recording workloads. The fan gives OEM equipment a defined air route and supports reliable monitoring service.
SUNON MF35101V3-1D01-A99 serves security monitoring systems. Airflow around network and control electronics helps address round-the-clock equipment heat. The fan gives OEM equipment a defined air route and supports system availability. It supports reliable equipment cooling.
Use the listed voltage, size, 6.1 m³/h airflow, 5000 rpm, and 0.24 W input for preliminary comparison.
It is listed for telecom cabinets and network equipment. Check dimensions, airflow, pressure, and the installation environment against the actual equipment.
The supplied row does not state the connector or lead configuration. Follow the model-specific wiring drawing.
Match voltage, dimensions, mounting, airflow direction, airflow, pressure, connector, control signal, and protection before substitution.
Compare its listed 0.24 W input with the required airflow and run time. Total savings depend on the complete system duty point.

The MF30060V2-10000-A99 is SUNON's 5 VDC, 30 × 30 × 6 mm DC axial fan option for telecom cabinets and network equipment. A listed input of 0.36 W is the model's notable electrical characteristic. Use the documented operating point when planning compatibility checking. Reconcile the model code with the required electrical interface.
Read More
SUNON configures MF30060V1-10000-A99 as a 30 × 30 × 6 mm DC axial fan for telecom cabinets and network equipment, operating at 5 VDC. Its 8.3 m³/h airflow rating suits the stated equipment-cooling role. Review its pressure capability during compatibility checking. Reconcile the model code with the required electrical interface.
Read More
Within telecom cabinets and network equipment, MF25150V3-10000-A99 provides a 25 × 25 × 15 mm, 5 VDC DC axial fan configuration. A listed input of 0.18 W is the model's notable electrical characteristic. Treat the dimensional envelope as a primary input to compatibility checking. Reconcile the model code with the required electrical interface.
Read More
Designed for telecom cabinets and network equipment, SUNON MF25150V2-10000-A99 is a 5 VDC DC axial fan in a 25 × 25 × 15 mm frame. A listed input of 0.23 W is the model's notable electrical characteristic. Base compatibility checking on the stated acoustic value. Reconcile the model code with the required electrical interface.
Read More
Within telecom cabinets and network equipment, SUNON MF25150V1-10000-A99 serves as a 25 × 25 × 15 mm DC axial fan operating at 5 VDC. Its 5.3 m³/h airflow rating suits the stated equipment-cooling role. During compatibility checking, compare the model's electrical load. Reconcile the model code with the required electrical interface.
Read More
For telecom cabinets and network equipment, MF25101V3-10000-A99 combines 12 VDC operation with a 25 × 25 × 10 mm DC axial fan design. A listed input of 0.21 W is the model's notable electrical characteristic. The recorded speed benchmark should guide compatibility checking. Reconcile the model code with the required electrical interface.
Read More