





Within telecom cabinets and network equipment, SUNON MF40201VX-1000U-A99 serves as a 40 × 40 × 20 mm DC axial fan operating at 12 VDC. Its 10.8 m³/h airflow rating suits the stated equipment-cooling role. Treat the frame geometry as a primary input to replacement evaluation. Check the full suffix before confirming connector details.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 40*40*20 |
| Max.Air Flow(m³/h) | 10.8 |
| Input Power(W) | 1.06 |
| Speed(rpm) | 8000 |
| Noise(db) | 27.5 |
Designed for telecommunications equipment, the SUNON MF40201VX-1000U-A99 provides DC brushless axial fan cooling in a format suited to equipment integration. It helps limit local heat buildup during operation.
SUNON's DC product line is developed around MagLev motor technology, supporting low-friction rotation, energy-conscious operation and long service life in compact formats.
The final MF40201VX-1000U-A99 selection should consider connector reach as part of the installation layout. Finishing airflow mapping before release helps reduce integration uncertainty and supports reliable equipment cooling. Review circulation around the components most sensitive to heat. The final assembly should be tested under its expected thermal load.
SUNON MF40201VX-1000U-A99 serves security-camera equipment. Airflow around image sensors, processors and power circuits helps address heat inside compact camera housings. The fan gives OEM equipment a defined air route and supports stable video operation.
SUNON MF40201VX-1000U-A99 serves video-recording equipment. Airflow around storage, processing and power assemblies helps address continuous recording workloads. The fan gives OEM equipment a defined air route and supports reliable monitoring service.
SUNON MF40201VX-1000U-A99 serves security monitoring systems. Airflow around network and control electronics helps address round-the-clock equipment heat. The fan gives OEM equipment a defined air route and supports system availability. It supports reliable equipment cooling.
Confirm any missing bearing, connector, control, IP rating, life, certification, and performance-curve details for the complete part number.
Speed-control capability is not stated for this complete part number. Confirm the signal and controller requirements before use.
Compare its listed 1.06 W input with the required airflow and run time. Total savings depend on the complete system duty point.
The listed speed is 8000 rpm. Confirm frequency, control method, and duty point for the installed system.
The supplied product-line reference discusses long-life cooling, but continuous-duty limits for this full suffix must be verified from its datasheet and operating conditions.
No pressure value is provided in the worksheet. Request the model-specific performance curve if pressure is critical.

The MF50151VX-1000U-A99 is SUNON's 12 VDC, 50 × 50 × 15 mm DC blower option for telecom cabinets and network equipment. 7200 rpm is the model's most distinctive operating parameter. During airflow-path design, compare the model's airflow profile. Obtain the applicable curve before final duty-point approval.
Read More
SUNON MF40102V2-Q00U-A99 is a 24 VDC DC blower in a 40 × 40 × 10 mm format for telecom cabinets and network equipment. Its 11.9 m³/h airflow rating suits the stated equipment-cooling role. Base maintenance preparation on the stated motor input. Confirm temperature and service-life limits from current data.
Read More
Within telecom cabinets and network equipment, SUNON MF80152V1-1000U-A99 serves as a 80 × 80 × 15 mm DC axial fan operating at 24 VDC. Its 3500 rpm rating defines a lower-speed operating point. Review its thermal-duty record during maintenance preparation. Confirm temperature and service-life limits from current data.
Read More
SUNON MF80151V3-1000U-A99 combines a 80 × 80 × 15 mm DC axial fan platform with a 12 VDC rating for telecom cabinets and network equipment. Its 2800 rpm rating defines a lower-speed operating point. For acoustic assessment, start with the supplied technical profile. Match the exact part number before approving a substitute.
Read More
The MF40101VX-1000U-F99 is SUNON's 12 VDC, 40 × 40 × 10 mm DC axial fan option for telecom cabinets and network equipment. 8500 rpm is the model's most distinctive operating parameter. During maintenance preparation, compare the model's ventilation capacity. Confirm temperature and service-life limits from current data.
Read More
SUNON MF60251VX-1000U-G99 combines a 60 × 60 × 25 mm DC axial fan platform with a 12 VDC rating for telecom cabinets and network equipment. A listed noise value of 31.2 dB is the model's key differentiator. Review its rotational rating during airflow-path design. Obtain the applicable curve before final duty-point approval.
Read More