

The MF50151V1-1Q021-S99 is SUNON's 12 VDC, 50 × 50 × 15 mm DC blower option for telecom cabinets and network equipment. A listed input of 0.8 W is the model's notable electrical characteristic. During procurement comparison, compare the model's acoustic value. Use the latest specification for frequency and tolerance limits.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 50x50x15mm |
| Max.Air Flow(m³/h) | 28.9 |
| Max.Pressure(Pa) | 57.3 |
| Input Power(W) | 0.8 |
| Speed(rpm) | 6100 |
| Noise(db) | 33 |
Equipment builders can integrate SUNON MF50151V1-1Q021-S99, a DC brushless axial fan, into telecommunications equipment. The design supplies the air movement required to carry component heat out of confined spaces.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. System resistance, grille geometry and cable clearance should be reviewed together to maintain predictable air delivery.
MF50151V1-1Q021-S99 is best integrated with attention to grille resistance. Engineering teams can use wiring verification before ordering to verify thermal suitability and give buyers an auditable selection basis. Match polarity, leads and control functions to the equipment harness.
SUNON MF50151V1-1Q021-S99 serves security-camera equipment. Airflow around image sensors, processors and power circuits helps address heat inside compact camera housings. The fan gives OEM equipment a defined air route and supports stable video operation.
SUNON MF50151V1-1Q021-S99 serves video-recording equipment. Airflow around storage, processing and power assemblies helps address continuous recording workloads. The fan gives OEM equipment a defined air route and supports reliable monitoring service.
SUNON MF50151V1-1Q021-S99 serves security monitoring systems. Airflow around network and control electronics helps address round-the-clock equipment heat. The fan gives OEM equipment a defined air route and supports system availability. It supports reliable equipment cooling.
It is listed for telecom cabinets and network equipment. Check dimensions, airflow, pressure, and the installation environment against the actual equipment.
The exact IP or protection option is not stated in the supplied row. Confirm the full suffix in the applicable SUNON datasheet.
Speed-control capability is not stated for this complete part number. Confirm the signal and controller requirements before use.
Compare its listed 0.8 W input with the required airflow and run time. Total savings depend on the complete system duty point.
The worksheet lists 33 dB. Installation distance, airflow resistance, and enclosure acoustics can change the measured result.
The worksheet lists up to 28.9 m³/h. Verify the operating point against system resistance.

The 40 × 40 × 10 mm MF40100V1-Q000-S99 brings 5 VDC DC axial fan cooling to telecom cabinets and network equipment. A listed input of 0.68 W is the model's notable electrical characteristic. The recorded equipment fit should guide maintenance preparation. Confirm temperature and service-life limits from current data.
Read More
The MF30060V2-10000-A99 is SUNON's 5 VDC, 30 × 30 × 6 mm DC axial fan option for telecom cabinets and network equipment. A listed input of 0.36 W is the model's notable electrical characteristic. Use the documented operating point when planning compatibility checking. Reconcile the model code with the required electrical interface.
Read More
SUNON configures MF30060V1-10000-A99 as a 30 × 30 × 6 mm DC axial fan for telecom cabinets and network equipment, operating at 5 VDC. Its 8.3 m³/h airflow rating suits the stated equipment-cooling role. Review its pressure capability during compatibility checking. Reconcile the model code with the required electrical interface.
Read More
Within telecom cabinets and network equipment, MF25150V3-10000-A99 provides a 25 × 25 × 15 mm, 5 VDC DC axial fan configuration. A listed input of 0.18 W is the model's notable electrical characteristic. Treat the dimensional envelope as a primary input to compatibility checking. Reconcile the model code with the required electrical interface.
Read More
Designed for telecom cabinets and network equipment, SUNON MF25150V2-10000-A99 is a 5 VDC DC axial fan in a 25 × 25 × 15 mm frame. A listed input of 0.23 W is the model's notable electrical characteristic. Base compatibility checking on the stated acoustic value. Reconcile the model code with the required electrical interface.
Read More
Within telecom cabinets and network equipment, SUNON MF25150V1-10000-A99 serves as a 25 × 25 × 15 mm DC axial fan operating at 5 VDC. Its 5.3 m³/h airflow rating suits the stated equipment-cooling role. During compatibility checking, compare the model's electrical load. Reconcile the model code with the required electrical interface.
Read More