

The MF50151VX-1000U-S99 is SUNON's 12 VDC, 50 × 50 × 15 mm DC blower option for telecom cabinets and network equipment. 7200 rpm is the model's most distinctive operating parameter. Base controller selection on the stated volume-flow figure. Treat bearing and life data as suffix-specific.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 50x50x15mm |
| Max.Air Flow(m³/h) | 31.6 |
| Max.Pressure(Pa) | 77.2 |
| Input Power(W) | 1.32 |
| Speed(rpm) | 7200 |
| Noise(db) | 38.1 |
For telecommunications equipment, SUNON MF50151VX-1000U-S99 serves as a DC brushless axial fan. The fan supports temperature control in equipment that runs through sustained or repeated duty cycles.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. Correct airflow direction and inlet clearance help translate the documented operating point into reliable equipment-level cooling.
OEM teams specifying MF50151VX-1000U-S99 should check airflow direction and complete duty-point validation before ordering. A documented interface review helps purchasing teams control fit, cooling continuity and replacement planning. Record the intended operating point on the system resistance curve.
SUNON MF50151VX-1000U-S99 serves security-camera equipment. Airflow around image sensors, processors and power circuits helps address heat inside compact camera housings. The fan gives OEM equipment a defined air route and supports stable video operation.
SUNON MF50151VX-1000U-S99 serves video-recording equipment. Airflow around storage, processing and power assemblies helps address continuous recording workloads. The fan gives OEM equipment a defined air route and supports reliable monitoring service.
SUNON MF50151VX-1000U-S99 serves security monitoring systems. Airflow around network and control electronics helps address round-the-clock equipment heat. The fan gives OEM equipment a defined air route and supports system availability. It supports reliable equipment cooling.
It is listed for telecom cabinets and network equipment. Check dimensions, airflow, pressure, and the installation environment against the actual equipment.
Confirm any missing bearing, connector, control, IP rating, life, certification, and performance-curve details for the complete part number.
Match voltage, dimensions, mounting, airflow direction, airflow, pressure, connector, control signal, and protection before substitution.
Its documented 12 VDC rating and 7200 rpm is the model's most distinctive operating parameter. allow comparison with the required duty point without assuming unlisted options.
The worksheet lists 38.1 dB. Installation distance, airflow resistance, and enclosure acoustics can change the measured result.
Verify supply, wiring, obstructions, impeller movement, and protection status. Use the model datasheet before replacement or repair.

Positioned for telecom cabinets and network equipment, SUNON MF40060V1-1000U-S99 is a 5 VDC DC axial fan in a 40 × 40 × 6 mm frame. A listed input of 0.44 W is the model's notable electrical characteristic. Treat the power demand as a primary input to airflow-path design. Obtain the applicable curve before final duty-point approval.
Read More
The MF40101VX-1000U-F99 is SUNON's 12 VDC, 40 × 40 × 10 mm DC axial fan option for telecom cabinets and network equipment. 8500 rpm is the model's most distinctive operating parameter. During maintenance preparation, compare the model's ventilation capacity. Confirm temperature and service-life limits from current data.
Read More
SUNON MF60251VX-1000U-G99 combines a 60 × 60 × 25 mm DC axial fan platform with a 12 VDC rating for telecom cabinets and network equipment. A listed noise value of 31.2 dB is the model's key differentiator. Review its rotational rating during airflow-path design. Obtain the applicable curve before final duty-point approval.
Read More
The MF50151VX-1000U-A99 is SUNON's 12 VDC, 50 × 50 × 15 mm DC blower option for telecom cabinets and network equipment. 7200 rpm is the model's most distinctive operating parameter. During airflow-path design, compare the model's airflow profile. Obtain the applicable curve before final duty-point approval.
Read More
The MF50151VX-1B00U-G99 is SUNON's 12 VDC, 50 × 50 × 15 mm DC blower option for inverters, energy-storage systems, and charging equipment. 241.6 Pa maximum pressure is the standout documented duty-point value. Base acoustic assessment on the stated cooling specification. Match the exact part number before approving a substitute.
Read More
The MF30060V2-10000-A99 is SUNON's 5 VDC, 30 × 30 × 6 mm DC axial fan option for telecom cabinets and network equipment. A listed input of 0.36 W is the model's notable electrical characteristic. Use the documented operating point when planning compatibility checking. Reconcile the model code with the required electrical interface.
Read More