

SUNON MF60151VX-1000U-G99 combines a 60 × 60 × 15 mm DC blower platform with a 12 VDC rating for inverters, energy-storage systems, and charging equipment. 5400 rpm is the model's most distinctive operating parameter. Review its system interface during controller selection. Treat bearing and life data as suffix-specific.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 60x60x15mm |
| Max.Pressure(Pa) | 54.8 |
| Input Power(W) | 1.98 |
| Speed(rpm) | 5400 |
For new-energy power equipment, SUNON MF60151VX-1000U-G99 serves as a DC brushless axial fan. The fan supports temperature control in equipment that runs through sustained or repeated duty cycles.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. Correct airflow direction and inlet clearance help translate the documented operating point into reliable equipment-level cooling.
For an orderly design-in process, assess vibration transfer around MF60151VX-1000U-G99 and perform thermal-load testing before ordering. The result is a clearer cooling specification for engineering, purchasing and maintenance teams. Compare installed temperatures at representative equipment loads.
SUNON MF60151VX-1000U-G99 serves energy-storage systems. Airflow around battery-control and power-conversion assemblies helps address charging and discharging losses. The fan gives OEM equipment a defined air route and supports stable ESS operation. It supports reliable equipment cooling.
SUNON MF60151VX-1000U-G99 serves photovoltaic inverters. Airflow around switching devices and control electronics helps address solar power-conversion heat. The fan gives OEM equipment a defined air route and supports dependable inverter duty. It supports reliable equipment cooling.
SUNON MF60151VX-1000U-G99 serves electric-vehicle charging equipment. Airflow around power modules and control assemblies helps address high charging loads. The fan gives OEM equipment a defined air route and supports reliable charging operation. It supports reliable equipment cooling.
The supplied row has no airflow value; obtain the current performance curve before selection.
Yes. The worksheet lists up to 54.8 Pa; compare it with the system curve.
Use the listed voltage, size, 5400 rpm, and 1.98 W input for preliminary comparison.
It is listed for inverters, energy-storage systems, and charging equipment. Check dimensions, airflow, pressure, and the installation environment against the actual equipment.
The exact IP or protection option is not stated in the supplied row. Confirm the full suffix in the applicable SUNON datasheet.
Speed-control capability is not stated for this complete part number. Confirm the signal and controller requirements before use.

SUNON MF60251VX-1000U-G99 combines a 60 × 60 × 25 mm DC axial fan platform with a 12 VDC rating for telecom cabinets and network equipment. A listed noise value of 31.2 dB is the model's key differentiator. Review its rotational rating during airflow-path design. Obtain the applicable curve before final duty-point approval.
Read More
SUNON MF40100V1-1000U-G99 combines a 40 × 40 × 10 mm DC axial fan platform with a 5 VDC rating for telecom cabinets and network equipment. A listed input of 0.68 W is the model's notable electrical characteristic. For maintenance preparation, start with the supplied suffix definition. Confirm temperature and service-life limits from current data.
Read More
Applied in telecom cabinets and network equipment, SUNON MF60252V1-1000U-G99 is a 24 VDC DC axial fan in a 60 × 60 × 25 mm frame. A listed input of 1.2 W is the model's notable electrical characteristic. Base airflow-path design on the stated mounting size. Obtain the applicable curve before final duty-point approval.
Read More
SUNON configures MF35060V2-1000U-G99 as a 35 × 35 × 6 mm DC axial fan for telecom cabinets and network equipment, operating at 5 VDC. A listed input of 0.35 W is the model's notable electrical characteristic. For airflow-path design, start with the supplied pressure capability. Obtain the applicable curve before final duty-point approval.
Read More
The MF50151VX-1B00U-G99 is SUNON's 12 VDC, 50 × 50 × 15 mm DC blower option for inverters, energy-storage systems, and charging equipment. 241.6 Pa maximum pressure is the standout documented duty-point value. Base acoustic assessment on the stated cooling specification. Match the exact part number before approving a substitute.
Read More
The MF40101VX-1000U-F99 is SUNON's 12 VDC, 40 × 40 × 10 mm DC axial fan option for telecom cabinets and network equipment. 8500 rpm is the model's most distinctive operating parameter. During maintenance preparation, compare the model's ventilation capacity. Confirm temperature and service-life limits from current data.
Read More