





SUNON MF60252VX-1000U-A99 is a 24 VDC DC axial fan for inverters, energy-storage systems, and charging equipment. Its 27 m³/h airflow rating suits the stated equipment-cooling role. Treat the speed benchmark as a primary input to replacement evaluation. Check the full suffix before confirming connector details.
| Rated Voltage(V) | 24 |
|---|---|
| Size(mm) | 60*60*25 |
| Max.Air Flow(m³/h) | 27 |
| Input Power(W) | 2.04 |
| Speed(rpm) | 5200 |
| Noise(db) | 31.2 |
The SUNON MF60252VX-1000U-A99 positions a DC brushless axial fan for new-energy power equipment. Its airflow path supports heat removal from enclosed components and toward the equipment exhaust.
SUNON's DC product line is developed around MagLev motor technology, supporting low-friction rotation, energy-conscious operation and long service life in compact formats.
OEM teams specifying MF60252VX-1000U-A99 should check airflow direction and complete airflow mapping before release. A documented interface review helps purchasing teams control fit, cooling continuity and replacement planning. Verify orientation so heated air does not recirculate through the inlet. The final assembly should be tested under its expected thermal load.
SUNON MF60252VX-1000U-A99 serves energy-storage systems. Airflow around battery-control and power-conversion assemblies helps address charging and discharging losses. The fan gives OEM equipment a defined air route and supports stable ESS operation. It supports reliable equipment cooling.
SUNON MF60252VX-1000U-A99 serves photovoltaic inverters. Airflow around switching devices and control electronics helps address solar power-conversion heat. The fan gives OEM equipment a defined air route and supports dependable inverter duty. It supports reliable equipment cooling.
SUNON MF60252VX-1000U-A99 serves electric-vehicle charging equipment. Airflow around power modules and control assemblies helps address high charging loads. The fan gives OEM equipment a defined air route and supports reliable charging operation. It supports reliable equipment cooling.
Compare its listed 2.04 W input with the required airflow and run time. Total savings depend on the complete system duty point.
The worksheet lists 31.2 dB. Installation distance, airflow resistance, and enclosure acoustics can change the measured result.
The supplied product-line reference discusses long-life cooling, but continuous-duty limits for this full suffix must be verified from its datasheet and operating conditions.
No pressure value is provided in the worksheet. Request the model-specific performance curve if pressure is critical.
The worksheet lists 2.04 W input. Check supply capacity and operating conditions before commissioning.

The MF50151VX-1000U-A99 is SUNON's 12 VDC, 50 × 50 × 15 mm DC blower option for telecom cabinets and network equipment. 7200 rpm is the model's most distinctive operating parameter. During airflow-path design, compare the model's airflow profile. Obtain the applicable curve before final duty-point approval.
Read More
SUNON MF40102V2-Q00U-A99 is a 24 VDC DC blower in a 40 × 40 × 10 mm format for telecom cabinets and network equipment. Its 11.9 m³/h airflow rating suits the stated equipment-cooling role. Base maintenance preparation on the stated motor input. Confirm temperature and service-life limits from current data.
Read More
Within telecom cabinets and network equipment, SUNON MF80152V1-1000U-A99 serves as a 80 × 80 × 15 mm DC axial fan operating at 24 VDC. Its 3500 rpm rating defines a lower-speed operating point. Review its thermal-duty record during maintenance preparation. Confirm temperature and service-life limits from current data.
Read More
SUNON MF80151V3-1000U-A99 combines a 80 × 80 × 15 mm DC axial fan platform with a 12 VDC rating for telecom cabinets and network equipment. Its 2800 rpm rating defines a lower-speed operating point. For acoustic assessment, start with the supplied technical profile. Match the exact part number before approving a substitute.
Read More
The MF40101VX-1000U-F99 is SUNON's 12 VDC, 40 × 40 × 10 mm DC axial fan option for telecom cabinets and network equipment. 8500 rpm is the model's most distinctive operating parameter. During maintenance preparation, compare the model's ventilation capacity. Confirm temperature and service-life limits from current data.
Read More
SUNON MF60251VX-1000U-G99 combines a 60 × 60 × 25 mm DC axial fan platform with a 12 VDC rating for telecom cabinets and network equipment. A listed noise value of 31.2 dB is the model's key differentiator. Review its rotational rating during airflow-path design. Obtain the applicable curve before final duty-point approval.
Read More