

The PF40281B2-000U-A99 is SUNON's 12 VDC, 40 × 40 × 28 mm DC axial fan option for servers and data-center electronics. 13000 rpm is the model's most distinctive operating parameter. Review its catalog specification during thermal validation. Review connector, alarm, and sensor options separately.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 40x40x28mm |
| Max.Air Flow(m³/h) | 30.6 |
| Max.Pressure(Pa) | 288.9 |
| Input Power(W) | 2.64 |
| Speed(rpm) | 13000 |
| Noise(db) | 48.7 |
For industrial equipment, SUNON PF40281B2-000U-A99 serves as a DC brushless axial fan. The fan supports temperature control in equipment that runs through sustained or repeated duty cycles.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. System resistance, grille geometry and cable clearance should be reviewed together to maintain predictable air delivery.
When qualifying PF40281B2-000U-A99, give specific attention to service access. Use prototype trials before ordering to align enclosure cooling, mechanical integration and lifecycle sourcing expectations. Use a representative assembly rather than an unrestricted bench setup.
Confirm any missing bearing, connector, control, IP rating, life, certification, and performance-curve details for the complete part number.
Match voltage, dimensions, mounting, airflow direction, airflow, pressure, connector, control signal, and protection before substitution.
Compare its listed 2.64 W input with the required airflow and run time. Total savings depend on the complete system duty point.
The listed speed is 13000 rpm. Confirm frequency, control method, and duty point for the installed system.
The worksheet lists up to 30.6 m³/h. Verify the operating point against system resistance.
The exact bearing option is not confirmed by the row-level data. Check the complete suffix in the current SUNON specification.

For servers and data-center electronics, PF60252B2-10000-A99 combines 24 VDC operation with a 60 × 60 × 25 mm DC axial fan design. 124.5 Pa maximum pressure is the standout documented duty-point value. Use the documented speed benchmark when planning installation review. Obtain the applicable curve before final duty-point approval.
Read More
The PF60252B1-10000-A99 is SUNON's 24 VDC, 60 × 60 × 25 mm DC axial fan option for servers and data-center electronics. 139.5 Pa maximum pressure is the standout documented duty-point value. Review its airflow profile during installation review. Obtain the applicable curve before final duty-point approval.
Read More
The PF60251B3-10000-A99 is SUNON's 12 VDC, 60 × 60 × 25 mm DC axial fan option for servers and data-center electronics. 102.1 Pa maximum pressure is the standout documented duty-point value. Use the documented cooling specification when planning design qualification. Match the exact part number before approving a substitute.
Read More
For compact cooling within servers and data-center electronics, the PF60251B2-10000-A99 provides a 12 VDC DC axial fan configuration measuring 60 × 60 × 25 mm. 124.5 Pa maximum pressure is the standout documented duty-point value. Review its duty-point values during design qualification. Match the exact part number before approving a substitute.
Read More
SUNON PF60251B1-10000-A99 combines a 60 × 60 × 25 mm DC axial fan platform with a 12 VDC rating for servers and data-center electronics. 139.5 Pa maximum pressure is the standout documented duty-point value. Treat the installation footprint as a primary input to design qualification. Match the exact part number before approving a substitute.
Read More
Within servers and data-center electronics, SUNON PF40561B1-10000-A9H serves as a 40 × 40 × 56 mm DC axial fan operating at 12 VDC. 657.6 Pa maximum pressure is the standout documented duty-point value. During design qualification, compare the model's rated dataset. Match the exact part number before approving a substitute.
Read More