

Used in servers and data-center electronics, SUNON PF70201V1-000U-A99 is a 12 VDC DC blower in a 70 × 70 × 20 mm frame. Up to 73.1 m³/h is its most prominent listed performance figure. For wiring review, start with the supplied catalog specification. Confirm environmental protection for the ordered version.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 70x70x20mm |
| Max.Air Flow(m³/h) | 73.1 |
| Max.Pressure(Pa) | 69.7 |
| Input Power(W) | 3.42 |
| Speed(rpm) | 4600 |
| Noise(db) | 41.5 |
The SUNON PF70201V1-000U-A99 positions a DC brushless axial fan for industrial equipment. Its airflow path supports heat removal from enclosed components and toward the equipment exhaust.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. Correct airflow direction and inlet clearance help translate the documented operating point into reliable equipment-level cooling.
When qualifying PF70201V1-000U-A99, give specific attention to service access. Use airflow mapping before ordering to align enclosure cooling, mechanical integration and lifecycle sourcing expectations. Retain access for inspection, cleaning and replacement after installation.
The exact IP or protection option is not stated in the supplied row. Confirm the full suffix in the applicable SUNON datasheet.
Speed-control capability is not stated for this complete part number. Confirm the signal and controller requirements before use.
Its documented 12 VDC rating and up to 73.1 m³/h is its most prominent listed performance figure. allow comparison with the required duty point without assuming unlisted options.
The listed speed is 4600 rpm. Confirm frequency, control method, and duty point for the installed system.
Verify supply, wiring, obstructions, impeller movement, and protection status. Use the model datasheet before replacement or repair.

SUNON PF60251V3-10000-A99 combines a 60 × 60 × 25 mm DC axial fan platform with a 12 VDC rating for servers and data-center electronics. 102.1 Pa maximum pressure is the standout documented duty-point value. Base design qualification on the stated technical profile. Match the exact part number before approving a substitute.
Read More
Configured for servers and data-center electronics, SUNON PF60251V2-10000-A99 is a 12 VDC DC axial fan in a 60 × 60 × 25 mm frame. 124.5 Pa maximum pressure is the standout documented duty-point value. During design qualification, compare the model's model record. Match the exact part number before approving a substitute.
Read More
Within servers and data-center electronics, SUNON PF60251V1-10000-A99 serves as a 60 × 60 × 25 mm DC axial fan operating at 12 VDC. 139.5 Pa maximum pressure is the standout documented duty-point value. The recorded product configuration should guide design qualification. Match the exact part number before approving a substitute.
Read More
Equipment designers working with servers and data-center electronics can evaluate SUNON PF40281V1-0000-A99, a DC axial fan rated at 12 VDC and sized 40 × 40 × 28 mm. 17600 rpm is the model's most distinctive operating parameter. The recorded motor input should guide design qualification. Match the exact part number before approving a substitute.
Read More
The PF70201V1-1Q01U-S99 is SUNON's 12 VDC, 70 × 70 × 20 mm DC blower option for servers and data-center electronics. Up to 73.1 m³/h is its most prominent listed performance figure. During design qualification, compare the model's power demand. Match the exact part number before approving a substitute.
Read More
For servers and data-center electronics, PF60252B2-10000-A99 combines 24 VDC operation with a 60 × 60 × 25 mm DC axial fan design. 124.5 Pa maximum pressure is the standout documented duty-point value. Use the documented speed benchmark when planning installation review. Obtain the applicable curve before final duty-point approval.
Read More