

The 12 VDC SUNON PF80251B2-10000-A99 is a DC axial fan sized 80 × 80 × 25 mm for servers and data-center electronics. Up to 96.8 m³/h is its most prominent listed performance figure. During installation review, compare the model's installation footprint. Obtain the applicable curve before final duty-point approval.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 80x80x25mm |
| Max.Air Flow(m³/h) | 96.8 |
| Max.Pressure(Pa) | 87.2 |
| Input Power(W) | 3.06 |
| Speed(rpm) | 4500 |
| Noise(db) | 44 |
The PF80251B2-10000-A99 from SUNON addresses cooling needs in server and data-center equipment. As a DC brushless axial fan, it creates a defined inlet-to-outlet route across the thermal load.
The brushless DC motor architecture supports efficient electronic commutation and stable rotational performance for compact equipment cooling. System resistance, grille geometry and cable clearance should be reviewed together to maintain predictable air delivery.
PF80251B2-10000-A99 is best integrated with attention to grille resistance. Engineering teams can use maintenance planning during sourcing review to verify thermal suitability and give buyers an auditable selection basis. Account for the pressure loss introduced by guards and protective screens.
SUNON PF80251B2-10000-A99 serves server platforms. Airflow around processors, memory and power components helps address sustained computing loads. The fan gives OEM equipment a defined air route and supports stable server operation. It supports reliable equipment cooling.
SUNON PF80251B2-10000-A99 serves storage equipment. Airflow around drives, controllers and power assemblies helps address continuous data workloads. The fan gives OEM equipment a defined air route and supports reliable storage availability. It supports reliable equipment cooling.
SUNON PF80251B2-10000-A99 serves edge-computing systems. Airflow around compact processing and communication modules helps address high heat density. The fan gives OEM equipment a defined air route and supports consistent thermal control. It supports reliable equipment cooling.
SUNON PF80251B2-10000-A99 serves data-center equipment. Airflow around critical computing assemblies helps address round-the-clock heat generation. The fan gives OEM equipment a defined air route and supports infrastructure availability. It supports reliable equipment cooling.
The exact IP or protection option is not stated in the supplied row. Confirm the full suffix in the applicable SUNON datasheet.
Speed-control capability is not stated for this complete part number. Confirm the signal and controller requirements before use.
Its documented 12 VDC rating and up to 96.8 m³/h is its most prominent listed performance figure. allow comparison with the required duty point without assuming unlisted options.
The listed rating is 12 VDC. Verify polarity or mains frequency, wiring, and protection before commissioning.
Verify supply, wiring, obstructions, impeller movement, and protection status. Use the model datasheet before replacement or repair.

For servers and data-center electronics, PF60252B2-10000-A99 combines 24 VDC operation with a 60 × 60 × 25 mm DC axial fan design. 124.5 Pa maximum pressure is the standout documented duty-point value. Use the documented speed benchmark when planning installation review. Obtain the applicable curve before final duty-point approval.
Read More
Configured for servers and data-center electronics, SUNON PF60251V2-10000-A99 is a 12 VDC DC axial fan in a 60 × 60 × 25 mm frame. 124.5 Pa maximum pressure is the standout documented duty-point value. During design qualification, compare the model's model record. Match the exact part number before approving a substitute.
Read More
For compact cooling within servers and data-center electronics, the PF60251B2-10000-A99 provides a 12 VDC DC axial fan configuration measuring 60 × 60 × 25 mm. 124.5 Pa maximum pressure is the standout documented duty-point value. Review its duty-point values during design qualification. Match the exact part number before approving a substitute.
Read More
The PF60252B1-10000-A99 is SUNON's 24 VDC, 60 × 60 × 25 mm DC axial fan option for servers and data-center electronics. 139.5 Pa maximum pressure is the standout documented duty-point value. Review its airflow profile during installation review. Obtain the applicable curve before final duty-point approval.
Read More
For ventilation needs in servers and data-center electronics, the PF60251VX-10000-A99 provides a 12 VDC DC axial fan configuration measuring 60 × 60 × 25 mm. 8300 rpm is the model's most distinctive operating parameter. Treat the application data as a primary input to design qualification. Match the exact part number before approving a substitute.
Read More
SUNON PF60251V3-10000-A99 combines a 60 × 60 × 25 mm DC axial fan platform with a 12 VDC rating for servers and data-center electronics. 102.1 Pa maximum pressure is the standout documented duty-point value. Base design qualification on the stated technical profile. Match the exact part number before approving a substitute.
Read More