

Equipment designers working with servers and data-center electronics can evaluate SUNON PF92251B1-000U-S99, a DC axial fan rated at 12 VDC and sized 92 × 92 × 25 mm. Up to 127.4 m³/h is its most prominent listed performance figure. Base mounting verification on the stated rotational rating. Validate mounting and wiring from the model drawing.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 92x92x25mm |
| Max.Air Flow(m³/h) | 127.4 |
| Max.Pressure(Pa) | 87.2 |
| Input Power(W) | 4.7 |
| Speed(rpm) | 4500 |
| Noise(db) | 47 |
SUNON PF92251B1-000U-S99 is a DC brushless axial fan for industrial equipment. It establishes forced airflow where passive cooling cannot adequately protect heat-producing assemblies.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. The enclosure should direct air across the heat source because bypass flow can reduce cooling even when the fan runs normally.
To integrate PF92251B1-000U-S99 effectively, review outlet geometry at equipment level and arrange replacement-fit checks during prototype approval. Confirmed system compatibility supports stable cooling and repeatable procurement. Preserve a clear discharge region to avoid unnecessary downstream turbulence.
Assess reliability from the exact bearing, temperature, protection, and life data. The supplied series note alone does not confirm every suffix-specific option.
Confirm any missing bearing, connector, control, IP rating, life, certification, and performance-curve details for the complete part number.
Speed-control capability is not stated for this complete part number. Confirm the signal and controller requirements before use.
Compare its listed 4.7 W input with the required airflow and run time. Total savings depend on the complete system duty point.
The listed speed is 4500 rpm. Confirm frequency, control method, and duty point for the installed system.

The PF70201V1-1Q01U-S99 is SUNON's 12 VDC, 70 × 70 × 20 mm DC blower option for servers and data-center electronics. Up to 73.1 m³/h is its most prominent listed performance figure. During design qualification, compare the model's power demand. Match the exact part number before approving a substitute.
Read More
Built around servers and data-center electronics, SUNON PF80251B3-1000U-S99 is a 12 VDC DC axial fan in a 80 × 80 × 25 mm frame. Up to 90.1 m³/h is its most prominent listed performance figure. Review its acoustic value during airflow-path design. Obtain the applicable curve before final duty-point approval.
Read More
A 80 × 80 × 25 mm frame and 24 VDC rating define PF80252B1-1000U-S99, a DC axial fan for servers and data-center electronics. Up to 102 m³/h is its most prominent listed performance figure. Treat the system interface as a primary input to acoustic assessment. Match the exact part number before approving a substitute.
Read More
For servers and data-center electronics, PF60252B2-10000-A99 combines 24 VDC operation with a 60 × 60 × 25 mm DC axial fan design. 124.5 Pa maximum pressure is the standout documented duty-point value. Use the documented speed benchmark when planning installation review. Obtain the applicable curve before final duty-point approval.
Read More
The PF60252B1-10000-A99 is SUNON's 24 VDC, 60 × 60 × 25 mm DC axial fan option for servers and data-center electronics. 139.5 Pa maximum pressure is the standout documented duty-point value. Review its airflow profile during installation review. Obtain the applicable curve before final duty-point approval.
Read More
The PF60251B3-10000-A99 is SUNON's 12 VDC, 60 × 60 × 25 mm DC axial fan option for servers and data-center electronics. 102.1 Pa maximum pressure is the standout documented duty-point value. Use the documented cooling specification when planning design qualification. Match the exact part number before approving a substitute.
Read More