

The PF92252V2-10000-A99 is SUNON's 24 VDC, 92 × 92 × 25 mm DC axial fan option for servers and data-center electronics. Up to 118.9 m³/h is its most prominent listed performance figure. Base operating-cost analysis on the stated ventilation capacity. Validate mounting and wiring from the model drawing.
| Rated Voltage(V) | 24 |
|---|---|
| Size(mm) | 92x92x25mm |
| Max.Air Flow(m³/h) | 118.9 |
| Max.Pressure(Pa) | 74.7 |
| Input Power(W) | 3.48 |
| Speed(rpm) | 4200 |
| Noise(db) | 43.7 |
For server and data-center equipment, SUNON PF92252V2-10000-A99 serves as a DC brushless axial fan. The fan supports temperature control in equipment that runs through sustained or repeated duty cycles.
SUNON's DC product line is developed around MagLev motor technology, supporting low-friction rotation, energy-conscious operation and long service life in compact formats.
To integrate PF92252V2-10000-A99 effectively, review outlet geometry at equipment level and arrange thermal-load testing in equipment qualification. Confirmed system compatibility supports stable cooling and repeatable procurement. Compare installed temperatures at representative equipment loads. The final assembly should be tested under its expected thermal load.
SUNON PF92252V2-10000-A99 serves server platforms. Airflow around processors, memory and power components helps address sustained computing loads. The fan gives OEM equipment a defined air route and supports stable server operation. It supports reliable equipment cooling.
SUNON PF92252V2-10000-A99 serves storage equipment. Airflow around drives, controllers and power assemblies helps address continuous data workloads. The fan gives OEM equipment a defined air route and supports reliable storage availability. It supports reliable equipment cooling.
SUNON PF92252V2-10000-A99 serves edge-computing systems. Airflow around compact processing and communication modules helps address high heat density. The fan gives OEM equipment a defined air route and supports consistent thermal control. It supports reliable equipment cooling.
SUNON PF92252V2-10000-A99 serves data-center equipment. Airflow around critical computing assemblies helps address round-the-clock heat generation. The fan gives OEM equipment a defined air route and supports infrastructure availability. It supports reliable equipment cooling.
The supplied row does not state the connector or lead configuration. Follow the model-specific wiring drawing.
Match voltage, dimensions, mounting, airflow direction, airflow, pressure, connector, control signal, and protection before substitution.
Its documented 24 VDC rating and up to 118.9 m³/h is its most prominent listed performance figure. allow comparison with the required duty point without assuming unlisted options.
The listed rating is 24 VDC. Verify polarity or mains frequency, wiring, and protection before commissioning.
The worksheet lists up to 118.9 m³/h. Verify the operating point against system resistance.
Yes. The worksheet lists up to 74.7 Pa; compare it with the system curve.

For servers and data-center electronics, PF60252B2-10000-A99 combines 24 VDC operation with a 60 × 60 × 25 mm DC axial fan design. 124.5 Pa maximum pressure is the standout documented duty-point value. Use the documented speed benchmark when planning installation review. Obtain the applicable curve before final duty-point approval.
Read More
The PF60252B1-10000-A99 is SUNON's 24 VDC, 60 × 60 × 25 mm DC axial fan option for servers and data-center electronics. 139.5 Pa maximum pressure is the standout documented duty-point value. Review its airflow profile during installation review. Obtain the applicable curve before final duty-point approval.
Read More
For ventilation needs in servers and data-center electronics, the PF60251VX-10000-A99 provides a 12 VDC DC axial fan configuration measuring 60 × 60 × 25 mm. 8300 rpm is the model's most distinctive operating parameter. Treat the application data as a primary input to design qualification. Match the exact part number before approving a substitute.
Read More
SUNON PF60251V3-10000-A99 combines a 60 × 60 × 25 mm DC axial fan platform with a 12 VDC rating for servers and data-center electronics. 102.1 Pa maximum pressure is the standout documented duty-point value. Base design qualification on the stated technical profile. Match the exact part number before approving a substitute.
Read More
Configured for servers and data-center electronics, SUNON PF60251V2-10000-A99 is a 12 VDC DC axial fan in a 60 × 60 × 25 mm frame. 124.5 Pa maximum pressure is the standout documented duty-point value. During design qualification, compare the model's model record. Match the exact part number before approving a substitute.
Read More
Within servers and data-center electronics, SUNON PF60251V1-10000-A99 serves as a 60 × 60 × 25 mm DC axial fan operating at 12 VDC. 139.5 Pa maximum pressure is the standout documented duty-point value. The recorded product configuration should guide design qualification. Match the exact part number before approving a substitute.
Read More