

Designed for servers and data-center electronics, SUNON VF80381BX-1Q081-SBH is a 12 VDC DC blower in a 80 × 80 × 38 mm frame. 57.56 W input is the defining electrical load in the supplied data. During acoustic assessment, compare the model's volume-flow figure. Match the exact part number before approving a substitute.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 80*80*38 |
| Input Power(W) | 57.56 |
SUNON VF80381BX-1Q081-SBH is a DC brushless axial fan for industrial equipment. It establishes forced airflow where passive cooling cannot adequately protect heat-producing assemblies.
The exact fan curve should be reviewed against filters, guards and enclosure resistance so the selected operating point meets the required cooling load. The brushless DC motor architecture supports efficient electronic commutation and stable rotational performance for compact equipment cooling.
OEM teams specifying VF80381BX-1Q081-SBH should check airflow direction and complete acoustic evaluation during prototype approval. A documented interface review helps purchasing teams control fit, cooling continuity and replacement planning. Verify orientation so heated air does not recirculate through the inlet.
Assess reliability from the exact bearing, temperature, protection, and life data. The supplied series note alone does not confirm every suffix-specific option.
The supplied row does not state the connector or lead configuration. Follow the model-specific wiring drawing.
Inspect for dust, blocked airflow, abnormal noise, loose mounting, and wiring damage. Isolate power before cleaning or service.
Compare its listed 57.56 W input with the required airflow and run time. Total savings depend on the complete system duty point.
The listed rating is 12 VDC. Verify polarity or mains frequency, wiring, and protection before commissioning.

VF80864BX-1Q010-S9H serves servers and data-center electronics as a 80 × 80 × 86 mm DC blower rated at 54 VDC. The supplied data list 87.3 dB, an important acoustic selection parameter. Use the documented electrical load when planning system commissioning. Verify bearing and signal options in the exact datasheet.
Read More
The VF80804BX-1Q040-S9H is SUNON's 54 VDC, 80 × 80 × 80 mm DC blower option for servers and data-center electronics. The supplied data list 84.6 dB, an important acoustic selection parameter. During technical purchasing, compare the model's selection parameters. Request the exact performance curve for final engineering signoff.
Read More
Within servers and data-center electronics, VF60381BX-0000-S9H provides a 60 × 60 × 38 mm, 12 VDC DC axial fan configuration. 22800 rpm is the model's most distinctive operating parameter. Use the documented duty-point values when planning application screening. Validate approvals and protection at complete-part-number level.
Read More
Used in servers and data-center electronics, SUNON VF40561BX-0000-S9H is a 12 VDC DC blower in a 40 × 40 × 56 mm frame. 24000 rpm is the model's most distinctive operating parameter. Use the documented volume-flow figure when planning application screening. Validate approvals and protection at complete-part-number level.
Read More
The VF40281BX-1Q010-S9H is SUNON's 12 VDC, 40 × 40 × 28 mm DC axial fan option for servers and data-center electronics. 27000 rpm is the model's most distinctive operating parameter. Treat the acoustic value as a primary input to application screening. Validate approvals and protection at complete-part-number level.
Read More
SUNON VF60384BX-10000-A9H combines a 60 × 60 × 38 mm DC axial fan platform with a 48 VDC rating for servers and data-center electronics. 1205.6 Pa maximum pressure is the standout documented duty-point value. Treat the motor input as a primary input to project documentation. Reconcile the model code with the required electrical interface.
Read More