

GTM063PBU41R is a 3~380-480 VAC centrifugal fan for servers, medical equipment, laboratory equipment. Its main supplied feature is 4200 W input power for the listed electrical version. It also lists a 630 mm size specified in the upload data. Review fan selection for spares planning. Check the exact variant before ordering.
| Rated Voltage(V) | 3~ 380-480 |
|---|---|
| Size(mm) | 630 |
| Max.Air Flow(m³/h) | 20592 |
| Input Power(W) | 4200 |
| Speed(rpm) | 1800 |
The WISTRO GTM063PBU41R reinforces data centers and communication system as an AC blower fan, combining a small-footprint cooling role with a clear mechanical and electrical integration path.
For procurement teams, retaining the full model code reinforces controlled sourcing, compatible replacement and clearer maintenance records.
The housing and directional outlet create a focused air stream that can pass through heat sinks, filters or narrow electronic air channels.
The stated 630 mm size reinforces early mechanical-envelope and mounting checks. Preserve the specified ventilation flow direction during assembly. Review the approved electrical interface for the complete suffix. Validate sound and temperature in the finished enclosure.
For hardware in servers and data-communication hardware, WISTRO GTM063PBU41R acts as a heat removal component that cools computing and network assemblies. Designers should verify mounting, moving air direction and application resistance to preserve the intended application value.
WISTRO GTM063PBU41R is used in power supplies, inverters and control cabinets, where the AC blower fan cools power modules and controls. This gives hardware makers a practical forced-air cooling element that contributes to assembly reliability without changing the stated industry direction.
Assembly serving office, imaging and household appliances can integrate WISTRO GTM063PBU41R; the unit removes appliance heat. Assembly developers should verify mounting, moving air direction and assembly resistance to preserve the intended application value.
The WISTRO AC blower fan GTM063PBU41R addresses thermal demand in medical and laboratory instruments by helping to cools enclosed instrument electronics. This approach helps manufacturers balance temperature management effectiveness, enclosure space and lifecycle maintenance.
The supplied sources do not confirm an integrated controller. Verify the exact electrical variant and control requirement before ordering.
It may be evaluated for high-reliability cooling using the supplied parameters, but duty cycle, redundancy, ambient limits, and protection must be confirmed at system level.
The supplied application data covers servers, medical equipment, laboratory equipment. Confirm the installation's airflow, pressure, space, and electrical requirements.
No quantified cost-saving claim is supplied for this exact item. Compare energy use, controls, service needs, and purchase cost using the required duty point.
The upload sheet marks the item as In Stock, but available quantity should be confirmed when the order is placed.
The upload row lists 3~380-480 VAC. Confirm phase, frequency, terminals, and local supply conditions before wiring.

GTM063PBU41R is an EC centrifugal fan listed for server cooling on three-phase 380-480VAC. The 630 mm format is specified at 1800 rpm, with 20592 m3/h maximum airflow and a 4200 W input rating.
Read More
GTM056PUT34R is listed for three-phase 380-480VAC as an EC centrifugal fan for AHU cooling. Its 1550 rpm speed identifies a slower option than several smaller GTM entries; the supplied size is 560 mm.
Read More
GTM045PUV36R is listed as a three-phase 380-480VAC EC centrifugal fan for precision AC and AHUs. A 6000 W input is the key supply-sizing figure; the 450 mm entry must be checked against the final assembly drawing.
Read More
GTM056PBT34R combines a 565 mm EC centrifugal fan format with three-phase 380-480VAC operation for AHUs and precision AC. Its listed 1550 rpm speed is paired with 14068 m3/h maximum airflow and 3100 W input.
Read More
For AHU and precision air-conditioning layouts, GTM045PBV36R offers a listed 460 mm EC centrifugal fan format. The three-phase 380-480VAC model has a 3570 rpm speed specification and 6000 W listed input.
Read More
GTM050HBT34R provides EC centrifugal fan airflow for AHUs and precision air conditioning on three-phase 380-480VAC. A 500 mm format and 1820 rpm speed accompany its listed maximum airflow of 12908.1 m3/h.
Read More