

For industrial buyers serving chillers, cold-chain equipment, industrial refrigeration, FB065-SDE.Y.A4P 131093 is specified as a 400 VAC axial fan. Its representative supplied feature is a 650 mm size specified in the upload data. Selection focus: procurement specification during project specification.
| Rated Voltage(V) | 400 |
|---|---|
| Size(mm) | 650 |
The ZIEHL-ABEGG FB065-SDE.Y.A4P 131093 is an AC axial fan developed for chillers, cold-chain and refrigeration equipment. It gives equipment designers a defined airflow or control solution for managing heat under continuous operating conditions.
The 400 VAC rating should be matched to the equipment supply and the complete model suffix. The aerodynamic structure supports efficient airflow with stable rotational behavior. Correct installation helps preserve cooling capacity, control vibration and reduce avoidable noise over long operating cycles.
Before volume ordering FB065-SDE.Y.A4P 131093, confirm the duty point in the finished enclosure and review connector or controller requirements. The result is a documented solution for engineering, procurement and maintenance.
FB065-SDE.Y.A4P 131093 supports compact equipment with short inlet-ring installations. In this duty, it moves air through compact equipment designed around a short inlet ring. This duty requires consistent air movement because restricted passages and fluctuating loads can create local hot spots.
Directed airflow is valuable when filters, coils or enclosure geometry add resistance to the cooling route. As part of commercial refrigeration and heating equipment, FB065-SDE.Y.A4P 131093 supports condenser and equipment ventilation in refrigeration systems.
ZIEHL-ABEGG FB065-SDE.Y.A4P 131093 addresses airflow needs in chillers and heat-pump systems and keeps cooling air moving across coils when the unit operates for extended periods. The selection can be qualified against the finished system resistance and the expected duty cycle.
This duty requires consistent air movement because restricted passages and fluctuating loads can create local hot spots. Used within cold-chain, refrigerated display and storage equipment, FB065-SDE.Y.A4P 131093 circulates air through refrigerated display, storage and cold-chain equipment.
The upload row lists 400 VAC. Confirm phase, frequency, terminals, and local supply conditions before wiring.
Speed-control support is not stated for this exact item in the supplied sources. Confirm the motor and controller version before specifying control hardware.
No model-specific maintenance interval is supplied. Keep the airflow path clean, inspect mounting and electrical connections, and follow the exact product instructions.
The supplied row does not include airflow, pressure, speed, power, or noise values. Request the exact performance curve before final selection.
It may be evaluated for high-reliability cooling using the supplied parameters, but duty cycle, redundancy, ambient limits, and protection must be confirmed at system level.
No airflow or pressure figure is supplied for this exact row. Request the matching performance curve before sizing the system.

FB045-4EK.4F.V4P 209023 is a 1~230 VAC axial fan for data-communications equipment, heat pumps, ventilation systems. Its main supplied feature is a 450 mm size specified in the upload data. It also lists 5700 m³/h maximum airflow stated for this model. Review controller compatibility for project specification.
Read More
FB063-6DK.4I.V4P 101674 is a 400 VAC axial fan for chillers, cold-chain equipment, industrial refrigeration. Its main supplied feature is a compact construction intended to simplify equipment integration. It also lists a 630 mm size specified in the upload data. Review cooling margin for project specification.
Read More
FB035-VDW.2C.A4P 161665 is a 400 VAC axial fan for chillers, cold-chain equipment, industrial refrigeration. Its main supplied feature is a compact construction intended to simplify equipment integration. It also lists a 350 mm size specified in the upload data. Review installation clearance for retrofit assessment.
Read More
For chillers, cold-chain equipment, industrial refrigeration, FB050-6EK.4I.V4P 136349 combines 230 VAC operation with a axial fan configuration. Its representative supplied feature is a 500 mm size specified in the upload data. Selection focus: installation clearance during replacement review.
Read More
For industrial buyers serving chillers, cold-chain equipment, industrial refrigeration, FB056-6EK.4I.V4P 57208229 is specified as a 230 VAC axial fan. Its representative supplied feature is a 560 mm size specified in the upload data. Selection focus: air direction during replacement review.
Read More
FB050-VDK.4I.V4P 125331 is a 400 VAC axial fan for chillers, cold-chain equipment, industrial refrigeration. Its main supplied feature is a compact construction intended to simplify equipment integration. It also lists a 500 mm size specified in the upload data. Review control method for final model confirmation.
Read More