109P0424H3D19 Sanyo Axial Fan

Brand :: Sanyo

Model:: 109P0424H3D19 | Sanyo Denki 24VDC DC Axial Fan for UPS, server and telecom equipment cooling

Type:: Axial Fans

Industry:: Data Center Cooling

Description:: 109P0424H3D19 serves servers, UPS systems, and telecom equipment as a 40 × 40 × 28 mm DC axial fan rated at 24 VDC. Series focus: high airflow and pressure. The 40 × 40 × 28 mm format is the primary stated selection detail. Check wiring scheme review pressure capability. Focus: wiring scheme review pressure capability.

Datasheet:: 109P0424H3D19 | Sanyo Denki 24VDC DC Axial Fan for UPS, server and telecom equipment cooling Datasheet (Pdf)

Product Features

Rated Voltage(V)	24
Size(mm)	404028

Product Features

Efficient Cooling

For servers, storage systems and ICT equipment, the SANYO DENKI 109P0424H3D19 provides DC axial fan cooling in an integration-ready format. It establishes an active air path through restricted equipment spaces.

Engineers should review the model-specific fan curve against filters, grilles and enclosure resistance to confirm the required operating point. Procurement teams should match the entire part number to the approved specification. Thermal testing in a representative chassis confirms cooling margin before volume release.

Assess vibration transfer into enclosure panels. This provides buyers with a traceable selection basis. Confirm the final fan curve in the assembled equipment. Preserve clear inlet and outlet space during installation.

Application Industry

Server Cooling

The San Ace 109P0424H3D19 supports thermal management in server chassis and computing nodes. Reliable ventilation reduces hot spots around sensitive electronics and supports consistent equipment availability. It provides a practical cooling path for OEM integration.

Storage Systems

For storage arrays and data appliances, 109P0424H3D19 provides a dedicated forced-air cooling path. Reliable ventilation reduces hot spots around sensitive electronics and supports consistent equipment availability. It provides a practical cooling path for OEM integration.

ICT Equipment

SANYO DENKI 109P0424H3D19 serves network and other ICT hardware that operate with sustained internal heat. Reliable ventilation reduces hot spots around sensitive electronics and supports consistent equipment availability. It provides a practical cooling path for OEM integration.

Frequently Asked Questions

Can 109P0424H3D19 replace another fan directly?

Match voltage, size, mounting, airflow direction, airflow, pressure, connector, control signal, and protection before substitution.

What maintenance does 109P0424H3D19 require?

Inspect dust buildup, airflow blockage, abnormal noise, mounting security, and wiring condition; disconnect power before service.

Why choose 109P0424H3D19 instead of a standard fan?

Its 24 VDC rating and documented the 40 × 40 × 28 mm format is the primary stated selection detail. provide model-specific selection data without relying on unlisted claims.

What input power is listed for 109P0424H3D19?

Input power is not stated in the supplied row and requires confirmation.

What should be checked if 109P0424H3D19 stops?

Verify supply, connector, obstructions, impeller movement, and alarm or protection status using the model-specific troubleshooting data.

What bearing type does 109P0424H3D19 use?

The exact bearing is not stated in the supplied row. Confirm it from the complete model suffix and current Sanyo Denki datasheet.

Related Products

PMD1209PMB1A | SUNON 12V 12.5W 92x92x38mm 204.2m3/h 4900rpm DC Axial Fan for Industrial Cooling

SUNON PMD1209PMB1A combines a 92 × 92 × 38 mm DC blower platform with a 12 VDC rating for industrial electronics and equipment cooling. Up to 204.2 m³/h is its most prominent listed performance figure. Use the documented speed benchmark when planning engineering comparison. Confirm temperature and service-life limits from current data.

PFB0624GHE | Delta Electronics 24VDC 11.52W Axial Fan for Industrial Control Cabinet Cooling

PFB0624GHE uses a 10000 rpm axial fan rotor for 24VDC industrial cabinet cooling. At 60 mm square and 38 mm deep, this model lists 11.52 W input; its 359.7 Pa pressure ceiling is relevant to duct-resistance evaluation.

PMD2408PMB1-A | SUNON 24V 9.6W 80x80x38mm 142.97m3/h 5700rpm DC Axial Fan for Industrial Cooling

Within industrial electronics and equipment cooling, SUNON PMD2408PMB1-A serves as a 80 × 80 × 38 mm DC blower operating at 24 VDC. Up to 142.97 m³/h is its most prominent listed performance figure. Base engineering comparison on the stated pressure capability. Confirm temperature and service-life limits from current data.

PMD2408PTB1-A | SUNON 80x80x38mm DC Axial Fan for Industrial Cooling

Within industrial electronics and equipment cooling, PMD2408PTB1-A provides a 80 × 80 × 38 mm, 0 VDC DC blower configuration. Its 80 × 80 × 38 mm format is the main stated selection detail. During engineering comparison, compare the model's dimensional envelope. Confirm temperature and service-life limits from current data.

PMD2404PQB1-A | SUNON 26V 40x40x28mm DC Axial Fan for Industrial Cooling

The PMD2404PQB1-A is SUNON's 26 VDC, 40 × 40 × 28 mm DC blower option for industrial electronics and equipment cooling. A listed noise value of 3.3 dB is the model's key differentiator. The recorded acoustic value should guide engineering comparison. Confirm temperature and service-life limits from current data.

PMD2406PMB1-A | SUNON 24V 10.3W 60x60x38mm 96m3/h 8000rpm DC Axial Fan for Industrial Cooling

PMD2406PMB1-A serves industrial electronics and equipment cooling as a 60 × 60 × 38 mm DC blower rated at 24 VDC. 229.2 Pa maximum pressure is the standout documented duty-point value. For engineering comparison, start with the supplied electrical load. Confirm temperature and service-life limits from current data.

109P0424H3D19 Sanyo Axial Fan

Product Features

Product Features

Efficient Cooling

Application Industry

Server Cooling

Storage Systems

ICT Equipment

Frequently Asked Questions

Can 109P0424H3D19 replace another fan directly?

What maintenance does 109P0424H3D19 require?

Why choose 109P0424H3D19 instead of a standard fan?

What input power is listed for 109P0424H3D19?

What should be checked if 109P0424H3D19 stops?

What bearing type does 109P0424H3D19 use?

Related Products

PMD1209PMB1A | SUNON 12V 12.5W 92x92x38mm 204.2m3/h 4900rpm DC Axial Fan for Industrial Cooling

PFB0624GHE | Delta Electronics 24VDC 11.52W Axial Fan for Industrial Control Cabinet Cooling

PMD2408PMB1-A | SUNON 24V 9.6W 80x80x38mm 142.97m3/h 5700rpm DC Axial Fan for Industrial Cooling

PMD2408PTB1-A | SUNON 80x80x38mm DC Axial Fan for Industrial Cooling

PMD2404PQB1-A | SUNON 26V 40x40x28mm DC Axial Fan for Industrial Cooling

PMD2406PMB1-A | SUNON 24V 10.3W 60x60x38mm 96m3/h 8000rpm DC Axial Fan for Industrial Cooling

Message Form