

EF60202B3-0000-A99 addresses telecom cabinets, base stations, and network equipment through a 24 VDC DC axial fan platform measuring 60 × 60 × 20 mm. A listed input of 0.56 W is the model's notable electrical characteristic. Review its product configuration during airflow balancing. Review connector, alarm, and sensor options separately.
| Rated Voltage(V) | 24 |
|---|---|
| Size(mm) | 60x60x20mm |
| Max.Air Flow(m³/h) | 24 |
| Max.Pressure(Pa) | 22.4 |
| Input Power(W) | 0.56 |
| Speed(rpm) | 3000 |
| Noise(db) | 24.5 |
The EF60202B3-0000-A99 from SUNON addresses cooling needs in refrigeration equipment. As a DC brushless axial fan, it creates a defined inlet-to-outlet route across the thermal load.
The listed 24 m3/h maximum airflow can support active component cooling. Designers should compare this value with enclosure pressure loss rather than rely on free-air performance alone. A documented PWM input allows system demand to regulate speed, supporting part-load energy use and acoustic control.
When qualifying EF60202B3-0000-A99, give specific attention to service access. Use duty-point validation before volume production to align enclosure cooling, mechanical integration and lifecycle sourcing expectations. Retain access for inspection, cleaning and replacement after installation.
SUNON EF60202B3-0000-A99 serves commercial refrigeration equipment. Airflow around cabinet electronics and heat-exchange sections helps address recurring refrigeration loads. The fan gives OEM equipment a defined air route and supports stable temperature control.
SUNON EF60202B3-0000-A99 serves refrigerators and cold-storage equipment. Airflow around internal electronics and air passages helps address uneven thermal conditions. The fan gives OEM equipment a defined air route and supports reliable cooling operation.
SUNON EF60202B3-0000-A99 serves medical refrigeration equipment. Airflow around temperature-control electronics and heat exchangers helps address continuous cooling demand. The fan gives OEM equipment a defined air route and supports controlled storage conditions.
Stock and lead time can change. Confirm the exact suffix, quantity, and delivery date with the supplier before ordering.
The listed rating is 24 VDC. Verify polarity or mains frequency, wiring, and protection before commissioning.
The worksheet lists up to 24 m³/h. Verify the operating point against system resistance.
The exact bearing option is not confirmed by the row-level data. Check the complete suffix in the current SUNON specification.
Use the listed voltage, size, 24 m³/h airflow, 3000 rpm, and 0.56 W input for preliminary comparison.

Configured for telecom cabinets, base stations, and network equipment, SUNON EF40201B1-1D030-A99 is a 12 VDC DC axial fan in a 40 × 40 × 20 mm frame. A listed input of 0.66 W is the model's notable electrical characteristic. Review its volume-flow figure during mounting verification. Validate mounting and wiring from the model drawing.
Read More
Built for telecom cabinets, base stations, and network equipment, SUNON EF80152B1-EE070-S99 uses a 80 × 80 × 15 mm DC blower arrangement at 24 VDC. 2.16 W input is the defining electrical load in the supplied data. Treat the frame geometry as a primary input to wiring review. Confirm environmental protection for the ordered version.
Read More
Within telecom cabinets, base stations, and network equipment, SUNON EF80152B1-E04C-S99 serves as a 80 × 80 × 15 mm DC blower operating at 24 VDC. 2.16 W input is the defining electrical load in the supplied data. Base controller selection on the stated duty-point values. Treat bearing and life data as suffix-specific.
Read More
Within telecom cabinets, base stations, and network equipment, SUNON EF40100B1-1Q00-S99 serves as a 40 × 40 × 10 mm DC blower operating at 12 VDC. Its 40 × 40 × 10 mm format is the main stated selection detail. Use the documented frame geometry when planning controller selection. Treat bearing and life data as suffix-specific.
Read More
The EF50151B1-C03C-A99 is SUNON's 12 VDC, 50 × 50 × 15 mm DC blower option for telecom cabinets, base stations, and network equipment. Its 7.6 m³/h airflow rating suits the stated equipment-cooling role. Treat the operating point as a primary input to controller selection. Treat bearing and life data as suffix-specific.
Read More
Used in telecom cabinets, base stations, and network equipment, SUNON EF50101B2-C041-S99 is a 12 VDC DC blower in a 50 × 50 × 10 mm frame. A listed input of 1.44 W is the model's notable electrical characteristic. The recorded acoustic value should guide controller selection. Treat bearing and life data as suffix-specific.
Read More