GF60151B9-1E00U-AE9 SUNON Axial Fan

Brand :: SUNON

Model:: GF60151B9-1E00U-AE9 | SUNON 12V 0.39W 60x60x15mm 18m3/h DC Axial Fan for Industrial Cooling

Type:: Axial Fans

Industry:: Industrial Cooling

Description:: SUNON configures GF60151B9-1E00U-AE9 as a 60 × 60 × 15 mm DC axial fan for servers and data-center electronics, operating at 12 VDC. A listed input of 0.39 W is the model's notable electrical characteristic. Base cabinet ventilation planning on the stated performance curve. Verify bearing and signal options in the exact datasheet.

Datasheet:: GF60151B9-1E00U-AE9 | SUNON 12V 0.39W 60x60x15mm 18m3/h DC Axial Fan for Industrial Cooling Datasheet (Pdf)

Product Features

Rated Voltage(V)	12
Size(mm)	60x60x15mm
Max.Air Flow(m³/h)	18
Max.Pressure(Pa)	12.5
Input Power(W)	0.39
Speed(rpm)	2300
Noise(db)	17.1

Product Features

Low Noise Cooling

SUNON GF60151B9-1E00U-AE9 is a DC brushless axial fan for industrial equipment. It establishes forced airflow where passive cooling cannot adequately protect heat-producing assemblies.

The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. Rigid mounting and clear breathing space help control vibration, flow loss and the acoustic result of the complete assembly.

A dependable GF60151B9-1E00U-AE9 installation starts with a review of exhaust separation. Complete environmental checks before design lock to confirm compatibility, operating margin and the information needed for repeat orders. Separate discharge air from the intake path inside the finished enclosure.

Application Industry

Industrial Equipment

SUNON GF60151B9-1E00U-AE9 serves industrial machinery and electronic equipment. Airflow around controllers, drives and power devices helps address continuous internal heat. The fan gives OEM equipment a defined air route and supports stable equipment operation.

Frequently Asked Questions

How can GF60151B9-1E00U-AE9 affect operating cost?

Compare its listed 0.39 W input with the required airflow and run time. Total savings depend on the complete system duty point.

What noise data are available for GF60151B9-1E00U-AE9?

The worksheet lists 17.1 dB. Installation distance, airflow resistance, and enclosure acoustics can change the measured result.

What should be checked if GF60151B9-1E00U-AE9 stops?

Verify supply, wiring, obstructions, impeller movement, and protection status. Use the model datasheet before replacement or repair.

Does GF60151B9-1E00U-AE9 have a documented pressure rating?

Yes. The worksheet lists up to 12.5 Pa; compare it with the system curve.

How should GF60151B9-1E00U-AE9 be matched to an enclosure?

Review its 60 × 60 × 15 mm size, 18 m³/h airflow, 12.5 Pa pressure, system resistance, and available mounting space.

Related Products

GF92251B3-000U-AE9 | SUNON 12V 2.76W 92x92x25mm 110.4m3/h DC Axial Fan for Industrial Cooling

Within servers and data-center electronics, SUNON GF92251B3-000U-AE9 serves as a 92 × 92 × 25 mm DC axial fan operating at 12 VDC. Up to 110.4 m³/h is its most prominent listed performance figure. During thermal validation, compare the model's frame geometry. Review connector, alarm, and sensor options separately.

GF40282B3-10000-SDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

Within servers and data-center electronics, SUNON GF40282B3-10000-SDP serves as a 40 × 40 × 28 mm DC axial fan operating at 24 VDC. 10500 W input is the defining electrical load in the supplied data. For cooling-margin review, start with the supplied frame geometry. Check the full suffix before confirming connector details.

GF40282B3-10000-QDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-QDP addresses servers and data-center electronics through a 24 VDC DC axial fan platform measuring 40 × 40 × 28 mm. 10500 W input is the defining electrical load in the supplied data. Use the documented cooling output when planning cooling-margin review. Check the full suffix before confirming connector details.

GF40282B3-10000-AEP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

The GF40282B3-10000-AEP is SUNON's 24 VDC, 40 × 40 × 28 mm DC axial fan option for servers and data-center electronics. Its 500 rpm rating defines a lower-speed operating point. Review its operating point during cooling-margin review. Check the full suffix before confirming connector details.

GF40282B3-10000-ADP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

SUNON configures GF40282B3-10000-ADP as a 40 × 40 × 28 mm DC axial fan for servers and data-center electronics, operating at 24 VDC. Its 500 rpm rating defines a lower-speed operating point. Treat the pressure capability as a primary input to cooling-margin review. Check the full suffix before confirming connector details.

GF40282B2-10000-SDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

SUNON GF40282B2-10000-SDP combines a 40 × 40 × 28 mm DC axial fan platform with a 24 VDC rating for servers and data-center electronics. 13100 W input is the defining electrical load in the supplied data. Base cooling-margin review on the stated dimensional envelope. Check the full suffix before confirming connector details.

GF60151B9-1E00U-AE9 SUNON Axial Fan

Product Features

Product Features

Low Noise Cooling

Application Industry

Industrial Equipment

Frequently Asked Questions

How can GF60151B9-1E00U-AE9 affect operating cost?

What noise data are available for GF60151B9-1E00U-AE9?

What should be checked if GF60151B9-1E00U-AE9 stops?

Does GF60151B9-1E00U-AE9 have a documented pressure rating?

How should GF60151B9-1E00U-AE9 be matched to an enclosure?

Related Products

GF92251B3-000U-AE9 | SUNON 12V 2.76W 92x92x25mm 110.4m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-SDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-QDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-AEP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

GF40282B3-10000-ADP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

GF40282B2-10000-SDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

Message Form