PMD1209PMB1-A(2)GN SUNON Axial Fan

Brand :: SUNON

Model:: PMD1209PMB1-A(2)GN | SUNON 12V 12.5W 92x92x38mm 204.2m3/h DC Axial Fan for Industrial Cooling

Type:: Axial Fans

Industry:: Industrial Cooling

Description:: For thermal management in industrial electronics and equipment cooling, the PMD1209PMB1-A(2)GN provides a 12 VDC DC axial fan configuration measuring 92 × 92 × 38 mm. Up to 204.2 m³/h is its most prominent listed performance figure. Base thermal validation on the stated rated dataset. Review connector, alarm, and sensor options separately.

Datasheet:: PMD1209PMB1-A(2)GN | SUNON 12V 12.5W 92x92x38mm 204.2m3/h DC Axial Fan for Industrial Cooling Datasheet (Pdf)

Product Features

Rated Voltage(V)	12
Size(mm)	92x92x38mm
Max.Air Flow(m³/h)	204.2
Max.Pressure(Pa)	176.9
Input Power(W)	12.5
Speed(rpm)	4900
Noise(db)	57.6

Product Features

High Airflow Cooling

SUNON PMD1209PMB1-A(2)GN is a DC brushless axial fan for industrial equipment. It establishes forced airflow where passive cooling cannot adequately protect heat-producing assemblies.

The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. System resistance, grille geometry and cable clearance should be reviewed together to maintain predictable air delivery.

OEM teams specifying PMD1209PMB1-A(2)GN should check airflow direction and complete replacement-fit checks before ordering. A documented interface review helps purchasing teams control fit, cooling continuity and replacement planning. Verify orientation so heated air does not recirculate through the inlet.

Application Industry

Industrial Equipment

SUNON PMD1209PMB1-A(2)GN serves industrial machinery and electronic equipment. Airflow around controllers, drives and power devices helps address continuous internal heat. The fan gives OEM equipment a defined air route and supports stable equipment operation.

Frequently Asked Questions

How can PMD1209PMB1-A(2)GN affect operating cost?

Compare its listed 12.5 W input with the required airflow and run time. Total savings depend on the complete system duty point.

What speed is listed for PMD1209PMB1-A(2)GN?

The listed speed is 4900 rpm. Confirm frequency, control method, and duty point for the installed system.

What should be checked if PMD1209PMB1-A(2)GN stops?

Verify supply, wiring, obstructions, impeller movement, and protection status. Use the model datasheet before replacement or repair.

What installation checks apply to PMD1209PMB1-A(2)GN?

Keep the airflow path clear, secure the frame without distortion, and follow the exact wiring diagram and voltage rating.

What input power is listed for PMD1209PMB1-A(2)GN?

The worksheet lists 12.5 W input. Check supply capacity and operating conditions before commissioning.

Related Products

PMD1209PMB1-A(2).GN | SUNON 12V 12.5W 92x92x38mm 204.34m3/h DC Axial Fan for Industrial Cooling

Within industrial electronics and equipment cooling, SUNON PMD1209PMB1-A(2).GN serves as a 92 × 92 × 38 mm DC axial fan operating at 12 VDC. Up to 204.34 m³/h is its most prominent listed performance figure. For engineering comparison, start with the supplied rated dataset. Confirm temperature and service-life limits from current data.

PMD1209PMB1A | SUNON 12V 12.5W 92x92x38mm 204.2m3/h 4900rpm DC Axial Fan for Industrial Cooling

SUNON PMD1209PMB1A combines a 92 × 92 × 38 mm DC blower platform with a 12 VDC rating for industrial electronics and equipment cooling. Up to 204.2 m³/h is its most prominent listed performance figure. Use the documented speed benchmark when planning engineering comparison. Confirm temperature and service-life limits from current data.

PMD2412PMB2-A(2).GN | SUNON 24V 13.7W 120x120x38mm 288.8m3/h DC Axial Fan for Industrial Cooling

SUNON PMD2412PMB2-A(2).GN is a 24 VDC DC axial fan in a 120 × 120 × 38 mm format for industrial electronics and equipment cooling. Up to 288.8 m³/h is its most prominent listed performance figure. Use the documented motor input when planning engineering comparison. Confirm temperature and service-life limits from current data.

PMD2407PKB1-A.(2).GN | SUNON 24V 5W 70x70x20mm 73.1m3/h DC Axial Fan for Industrial Cooling

Positioned for industrial electronics and equipment cooling, SUNON PMD2407PKB1-A.(2).GN is a 24 VDC DC blower in a 70 × 70 × 20 mm frame. 5 W input is the defining electrical load in the supplied data. During engineering comparison, compare the model's catalog specification. Confirm temperature and service-life limits from current data.

PMD1212PMB2-A | SUNON 12V 14.4W 120x120x38mm 288.8m3/h DC Axial Fan for Industrial Cooling

SUNON PMD1212PMB2-A combines a 120 × 120 × 38 mm DC axial fan platform with a 12 VDC rating for industrial electronics and equipment cooling. Up to 288.8 m³/h is its most prominent listed performance figure. During engineering comparison, compare the model's installation footprint. Confirm temperature and service-life limits from current data.

PMD1209PMB2-A | SUNON 12V 8.5W 92x92x38mm 180.6m3/h 4400rpm DC Axial Fan for Industrial Cooling

Applied in industrial electronics and equipment cooling, SUNON PMD1209PMB2-A is a 12 VDC DC axial fan in a 92 × 92 × 38 mm frame. Up to 180.6 m³/h is its most prominent listed performance figure. The recorded selection parameters should guide engineering comparison. Confirm temperature and service-life limits from current data.

PMD1209PMB1-A(2)GN SUNON Axial Fan

Product Features

Product Features

High Airflow Cooling

Application Industry

Industrial Equipment

Frequently Asked Questions

How can PMD1209PMB1-A(2)GN affect operating cost?

What speed is listed for PMD1209PMB1-A(2)GN?

What should be checked if PMD1209PMB1-A(2)GN stops?

What installation checks apply to PMD1209PMB1-A(2)GN?

What input power is listed for PMD1209PMB1-A(2)GN?

Related Products

PMD1209PMB1-A(2).GN | SUNON 12V 12.5W 92x92x38mm 204.34m3/h DC Axial Fan for Industrial Cooling

PMD1209PMB1A | SUNON 12V 12.5W 92x92x38mm 204.2m3/h 4900rpm DC Axial Fan for Industrial Cooling

PMD2412PMB2-A(2).GN | SUNON 24V 13.7W 120x120x38mm 288.8m3/h DC Axial Fan for Industrial Cooling

PMD2407PKB1-A.(2).GN | SUNON 24V 5W 70x70x20mm 73.1m3/h DC Axial Fan for Industrial Cooling

PMD1212PMB2-A | SUNON 12V 14.4W 120x120x38mm 288.8m3/h DC Axial Fan for Industrial Cooling

PMD1209PMB2-A | SUNON 12V 8.5W 92x92x38mm 180.6m3/h 4400rpm DC Axial Fan for Industrial Cooling

Message Form