109P0424H7D28 Sanyo Axial Fan

Brand :: Sanyo

Model:: 109P0424H7D28 | Sanyo Denki 24VDC DC Axial Fan for UPS, server and telecom equipment cooling

Type:: Axial Fans

Industry:: Data Center Cooling

Description:: Sanyo Denki configures 109P0424H7D28 for servers, UPS systems, and telecom equipment as a 24 VDC DC axial fan with 40 × 40 × 15 mm dimensions. The 40 × 40 × 15 mm format is the primary stated selection detail. The recorded power demand should guide service-life planning. Treat bearing and life data as suffix-specific.

Datasheet:: 109P0424H7D28 | Sanyo Denki 24VDC DC Axial Fan for UPS, server and telecom equipment cooling Datasheet (Pdf)

Product Features

Rated Voltage(V)	24
Size(mm)	404015

Product Features

Low Vibration Fan

For servers, storage systems and ICT equipment, the SANYO DENKI 109P0424H7D28 provides DC axial fan cooling in an integration-ready format. It establishes an active air path through restricted equipment spaces.

Engineers should review the model-specific fan curve against filters, grilles and enclosure resistance to confirm the required operating point. Selection should include a system-resistance review, mounting check and harness confirmation. The full model code matters because signal and lead options can differ within a series.

Test component temperatures at peak load. The review links cooling performance to the approved BOM. Confirm the final fan curve in the assembled equipment. Preserve clear inlet and outlet space during installation.

Application Industry

Server Cooling

For server chassis and computing nodes, 109P0424H7D28 provides a dedicated forced-air cooling path. Air circulation around processors, power devices and control electronics limits heat concentration and supports stable operation. It supports reliable OEM equipment cooling.

Storage Systems

SANYO DENKI 109P0424H7D28 serves storage arrays and data appliances that operate with sustained internal heat. Air circulation around processors, power devices and control electronics limits heat concentration and supports stable operation. It supports reliable OEM equipment cooling.

ICT Equipment

109P0424H7D28 is suitable for network and other ICT hardware. These systems need continuous heat removal because compact layouts and rising power density restrict natural convection. It supports reliable OEM equipment cooling. Selection should follow the approved full model code.

Frequently Asked Questions

What should be checked if 109P0424H7D28 stops?

Verify supply, connector, obstructions, impeller movement, and alarm or protection status using the model-specific troubleshooting data.

Is 109P0424H7D28 easy to install and maintain?

Confirm connector and mounting details, keep the airflow path clear, and isolate power before cleaning or service.

How should 109P0424H7D28 be matched to an enclosure?

Check its 40 × 40 × 15 mm size, mounting points, airflow direction, and system resistance.

What equipment is 109P0424H7D28 suited to?

It is listed for servers, UPS systems, and telecom equipment. Confirm airflow, pressure, dimensions, and environmental conditions against the actual equipment.

What IP protection is documented for 109P0424H7D28?

No exact IP rating is supplied for this model row. Check the current model datasheet before use in water, dust, or oil exposure.

Related Products

PFB0624GHE | Delta Electronics 24VDC 11.52W Axial Fan for Industrial Control Cabinet Cooling

PFB0624GHE uses a 10000 rpm axial fan rotor for 24VDC industrial cabinet cooling. At 60 mm square and 38 mm deep, this model lists 11.52 W input; its 359.7 Pa pressure ceiling is relevant to duct-resistance evaluation.

PMD1209PMB1A | SUNON 12V 12.5W 92x92x38mm 204.2m3/h 4900rpm DC Axial Fan for Industrial Cooling

SUNON PMD1209PMB1A combines a 92 × 92 × 38 mm DC blower platform with a 12 VDC rating for industrial electronics and equipment cooling. Up to 204.2 m³/h is its most prominent listed performance figure. Use the documented speed benchmark when planning engineering comparison. Confirm temperature and service-life limits from current data.

PMD2408PMB1-A | SUNON 24V 9.6W 80x80x38mm 142.97m3/h 5700rpm DC Axial Fan for Industrial Cooling

Within industrial electronics and equipment cooling, SUNON PMD2408PMB1-A serves as a 80 × 80 × 38 mm DC blower operating at 24 VDC. Up to 142.97 m³/h is its most prominent listed performance figure. Base engineering comparison on the stated pressure capability. Confirm temperature and service-life limits from current data.

PMD2408PTB1-A | SUNON 80x80x38mm DC Axial Fan for Industrial Cooling

Within industrial electronics and equipment cooling, PMD2408PTB1-A provides a 80 × 80 × 38 mm, 0 VDC DC blower configuration. Its 80 × 80 × 38 mm format is the main stated selection detail. During engineering comparison, compare the model's dimensional envelope. Confirm temperature and service-life limits from current data.

PMD2412PMB2-A | SUNON 24V 13.7W 120x120x38mm 288.8m3/h DC Axial Fan for Industrial Cooling

Engineered for industrial electronics and equipment cooling, SUNON PMD2412PMB2-A is a 24 VDC DC axial fan in a 120 × 120 × 38 mm frame. Up to 288.8 m³/h is its most prominent listed performance figure. Review its airflow profile during engineering comparison. Confirm temperature and service-life limits from current data.

PFM0812HE | Delta Electronics 12VDC 51.6W DC Fan for Industrial Electronics Cooling

The 16300 rpm PFM0812HE is a 12VDC fan for industrial electronics cooling. A listed 1237.7 Pa maximum static pressure characterizes its 80 x 80 x 38 mm assembly, alongside a 51.6 W input rating.

109P0424H7D28 Sanyo Axial Fan

Product Features

Product Features

Low Vibration Fan

Application Industry

Server Cooling

Storage Systems

ICT Equipment

Frequently Asked Questions

What should be checked if 109P0424H7D28 stops?

Is 109P0424H7D28 easy to install and maintain?

How should 109P0424H7D28 be matched to an enclosure?

What equipment is 109P0424H7D28 suited to?

What IP protection is documented for 109P0424H7D28?

Related Products

PFB0624GHE | Delta Electronics 24VDC 11.52W Axial Fan for Industrial Control Cabinet Cooling

PMD1209PMB1A | SUNON 12V 12.5W 92x92x38mm 204.2m3/h 4900rpm DC Axial Fan for Industrial Cooling

PMD2408PMB1-A | SUNON 24V 9.6W 80x80x38mm 142.97m3/h 5700rpm DC Axial Fan for Industrial Cooling

PMD2408PTB1-A | SUNON 80x80x38mm DC Axial Fan for Industrial Cooling

PMD2412PMB2-A | SUNON 24V 13.7W 120x120x38mm 288.8m3/h DC Axial Fan for Industrial Cooling

PFM0812HE | Delta Electronics 12VDC 51.6W DC Fan for Industrial Electronics Cooling

Message Form