GF60151B7-1E000-AC9 SUNON Axial Fan

Brand :: SUNON

Model:: GF60151B7-1E000-AC9 | SUNON 12V 0.96W 60x60x15mm 30.9m3/h DC Axial Fan for Data Center Cooling

Type:: Axial Fans

Industry:: Data Center Cooling

Description:: Designed for servers and data-center electronics, SUNON GF60151B7-1E000-AC9 is a 12 VDC DC axial fan in a 60 × 60 × 15 mm frame. 32.4 Pa maximum pressure is the standout documented duty-point value. For cooling-margin review, start with the supplied mounting size. Check the full suffix before confirming connector details.

Datasheet:: GF60151B7-1E000-AC9 | SUNON 12V 0.96W 60x60x15mm 30.9m3/h DC Axial Fan for Data Center Cooling Datasheet (Pdf)

Product Features

Rated Voltage(V)	12
Size(mm)	60x60x15mm
Max.Air Flow(m³/h)	30.9
Max.Pressure(Pa)	32.4
Input Power(W)	0.96
Speed(rpm)	3900
Noise(db)	29.8

Product Features

Reliable Fan Cooling

SUNON GF60151B7-1E000-AC9 is a DC brushless axial fan for server and data-center equipment. It establishes forced airflow where passive cooling cannot adequately protect heat-producing assemblies.

The brushless DC motor architecture supports efficient electronic commutation and stable rotational performance for compact equipment cooling. The enclosure should direct air across the heat source because bypass flow can reduce cooling even when the fan runs normally.

System designers selecting GF60151B7-1E000-AC9 should account for filter loading, then schedule wiring verification before design lock. This approach links equipment cooling needs with practical procurement and service decisions. Allow operating margin for dust accumulation across the selected filter.

Application Industry

Server Cooling

SUNON GF60151B7-1E000-AC9 serves server platforms. Airflow around processors, memory and power components helps address sustained computing loads. The fan gives OEM equipment a defined air route and supports stable server operation. It supports reliable equipment cooling.

Storage Systems

SUNON GF60151B7-1E000-AC9 serves storage equipment. Airflow around drives, controllers and power assemblies helps address continuous data workloads. The fan gives OEM equipment a defined air route and supports reliable storage availability. It supports reliable equipment cooling.

Edge Computing

SUNON GF60151B7-1E000-AC9 serves edge-computing systems. Airflow around compact processing and communication modules helps address high heat density. The fan gives OEM equipment a defined air route and supports consistent thermal control. It supports reliable equipment cooling.

Data Center Equipment

SUNON GF60151B7-1E000-AC9 serves data-center equipment. Airflow around critical computing assemblies helps address round-the-clock heat generation. The fan gives OEM equipment a defined air route and supports infrastructure availability. It supports reliable equipment cooling.

Frequently Asked Questions

What certification information is listed for GF60151B7-1E000-AC9?

The workbook marks the product as RoHS compliant. Confirm UL, TUV, VDE, or other project-specific approvals for the exact suffix.

Which selection data still require confirmation for GF60151B7-1E000-AC9?

Confirm any missing bearing, connector, control, IP rating, life, certification, and performance-curve details for the complete part number.

What maintenance is recommended for GF60151B7-1E000-AC9?

Inspect for dust, blocked airflow, abnormal noise, loose mounting, and wiring damage. Isolate power before cleaning or service.

Why choose GF60151B7-1E000-AC9 over a general cooling fan?

Its documented 12 VDC rating and 32.4 pa maximum pressure is the standout documented duty-point value. allow comparison with the required duty point without assuming unlisted options.

What voltage is required by GF60151B7-1E000-AC9?

The listed rating is 12 VDC. Verify polarity or mains frequency, wiring, and protection before commissioning.

Related Products

GF40282B3-10000-SDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

Within servers and data-center electronics, SUNON GF40282B3-10000-SDP serves as a 40 × 40 × 28 mm DC axial fan operating at 24 VDC. 10500 W input is the defining electrical load in the supplied data. For cooling-margin review, start with the supplied frame geometry. Check the full suffix before confirming connector details.

GF40282B3-10000-QDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-QDP addresses servers and data-center electronics through a 24 VDC DC axial fan platform measuring 40 × 40 × 28 mm. 10500 W input is the defining electrical load in the supplied data. Use the documented cooling output when planning cooling-margin review. Check the full suffix before confirming connector details.

GF40282B3-10000-AEP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

The GF40282B3-10000-AEP is SUNON's 24 VDC, 40 × 40 × 28 mm DC axial fan option for servers and data-center electronics. Its 500 rpm rating defines a lower-speed operating point. Review its operating point during cooling-margin review. Check the full suffix before confirming connector details.

GF40282B3-10000-ADP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

SUNON configures GF40282B3-10000-ADP as a 40 × 40 × 28 mm DC axial fan for servers and data-center electronics, operating at 24 VDC. Its 500 rpm rating defines a lower-speed operating point. Treat the pressure capability as a primary input to cooling-margin review. Check the full suffix before confirming connector details.

GF40282B2-10000-SDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

SUNON GF40282B2-10000-SDP combines a 40 × 40 × 28 mm DC axial fan platform with a 24 VDC rating for servers and data-center electronics. 13100 W input is the defining electrical load in the supplied data. Base cooling-margin review on the stated dimensional envelope. Check the full suffix before confirming connector details.

GF40282B2-10000-QDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

Applied in servers and data-center electronics, SUNON GF40282B2-10000-QDP is a 24 VDC DC axial fan in a 40 × 40 × 28 mm frame. 13100 W input is the defining electrical load in the supplied data. During cooling-margin review, compare the model's acoustic value. Check the full suffix before confirming connector details.

GF60151B7-1E000-AC9 SUNON Axial Fan

Product Features

Product Features

Reliable Fan Cooling

Application Industry

Server Cooling

Storage Systems

Edge Computing

Data Center Equipment

Frequently Asked Questions

What certification information is listed for GF60151B7-1E000-AC9?

Which selection data still require confirmation for GF60151B7-1E000-AC9?

What maintenance is recommended for GF60151B7-1E000-AC9?

Why choose GF60151B7-1E000-AC9 over a general cooling fan?

What voltage is required by GF60151B7-1E000-AC9?

Related Products

GF40282B3-10000-SDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-QDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-AEP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

GF40282B3-10000-ADP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

GF40282B2-10000-SDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

GF40282B2-10000-QDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

Message Form