GF60151B8-1E000-AE9 SUNON Axial Fan

Brand :: SUNON

Model:: GF60151B8-1E000-AE9 | SUNON 12V 0.84W 60x60x15mm 24.6m3/h DC Axial Fan for Data Center Cooling

Type:: Axial Fans

Industry:: Data Center Cooling

Description:: The GF60151B8-1E000-AE9 is SUNON's 12 VDC, 60 × 60 × 15 mm DC axial fan option for servers and data-center electronics. 22.4 Pa maximum pressure is the standout documented duty-point value. Base cooling-margin review on the stated catalog specification. Check the full suffix before confirming connector details.

Datasheet:: GF60151B8-1E000-AE9 | SUNON 12V 0.84W 60x60x15mm 24.6m3/h DC Axial Fan for Data Center Cooling Datasheet (Pdf)

Product Features

Rated Voltage(V)	12
Size(mm)	60x60x15mm
Max.Air Flow(m³/h)	24.6
Max.Pressure(Pa)	22.4
Input Power(W)	0.84
Speed(rpm)	3200
Noise(db)	24.9

Product Features

Low Noise Cooling

For server and data-center equipment, SUNON GF60151B8-1E000-AE9 serves as a DC brushless axial fan. The fan supports temperature control in equipment that runs through sustained or repeated duty cycles.

The brushless DC motor architecture supports efficient electronic commutation and stable rotational performance for compact equipment cooling. The enclosure should direct air across the heat source because bypass flow can reduce cooling even when the fan runs normally.

When qualifying GF60151B8-1E000-AE9, give specific attention to service access. Use wiring verification before design lock to align enclosure cooling, mechanical integration and lifecycle sourcing expectations. Match polarity, leads and control functions to the equipment harness.

Application Industry

Server Cooling

SUNON GF60151B8-1E000-AE9 serves server platforms. Airflow around processors, memory and power components helps address sustained computing loads. The fan gives OEM equipment a defined air route and supports stable server operation. It supports reliable equipment cooling.

Storage Systems

SUNON GF60151B8-1E000-AE9 serves storage equipment. Airflow around drives, controllers and power assemblies helps address continuous data workloads. The fan gives OEM equipment a defined air route and supports reliable storage availability. It supports reliable equipment cooling.

Edge Computing

SUNON GF60151B8-1E000-AE9 serves edge-computing systems. Airflow around compact processing and communication modules helps address high heat density. The fan gives OEM equipment a defined air route and supports consistent thermal control. It supports reliable equipment cooling.

Data Center Equipment

SUNON GF60151B8-1E000-AE9 serves data-center equipment. Airflow around critical computing assemblies helps address round-the-clock heat generation. The fan gives OEM equipment a defined air route and supports infrastructure availability. It supports reliable equipment cooling.

Frequently Asked Questions

What input power is listed for GF60151B8-1E000-AE9?

The worksheet lists 0.84 W input. Check supply capacity and operating conditions before commissioning.

What certification information is listed for GF60151B8-1E000-AE9?

The workbook marks the product as RoHS compliant. Confirm UL, TUV, VDE, or other project-specific approvals for the exact suffix.

Which selection data still require confirmation for GF60151B8-1E000-AE9?

Confirm any missing bearing, connector, control, IP rating, life, certification, and performance-curve details for the complete part number.

Is GF60151B8-1E000-AE9 compatible with a replacement fan?

Match voltage, dimensions, mounting, airflow direction, airflow, pressure, connector, control signal, and protection before substitution.

Why choose GF60151B8-1E000-AE9 over a general cooling fan?

Its documented 12 VDC rating and 22.4 pa maximum pressure is the standout documented duty-point value. allow comparison with the required duty point without assuming unlisted options.

What noise data are available for GF60151B8-1E000-AE9?

The worksheet lists 24.9 dB. Installation distance, airflow resistance, and enclosure acoustics can change the measured result.

Related Products

GF40282B3-10000-SDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

Within servers and data-center electronics, SUNON GF40282B3-10000-SDP serves as a 40 × 40 × 28 mm DC axial fan operating at 24 VDC. 10500 W input is the defining electrical load in the supplied data. For cooling-margin review, start with the supplied frame geometry. Check the full suffix before confirming connector details.

GF40282B3-10000-QDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-QDP addresses servers and data-center electronics through a 24 VDC DC axial fan platform measuring 40 × 40 × 28 mm. 10500 W input is the defining electrical load in the supplied data. Use the documented cooling output when planning cooling-margin review. Check the full suffix before confirming connector details.

GF40282B3-10000-AEP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

The GF40282B3-10000-AEP is SUNON's 24 VDC, 40 × 40 × 28 mm DC axial fan option for servers and data-center electronics. Its 500 rpm rating defines a lower-speed operating point. Review its operating point during cooling-margin review. Check the full suffix before confirming connector details.

GF40282B3-10000-ADP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

SUNON configures GF40282B3-10000-ADP as a 40 × 40 × 28 mm DC axial fan for servers and data-center electronics, operating at 24 VDC. Its 500 rpm rating defines a lower-speed operating point. Treat the pressure capability as a primary input to cooling-margin review. Check the full suffix before confirming connector details.

GF40282B2-10000-SDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

SUNON GF40282B2-10000-SDP combines a 40 × 40 × 28 mm DC axial fan platform with a 24 VDC rating for servers and data-center electronics. 13100 W input is the defining electrical load in the supplied data. Base cooling-margin review on the stated dimensional envelope. Check the full suffix before confirming connector details.

GF40282B2-10000-QDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

Applied in servers and data-center electronics, SUNON GF40282B2-10000-QDP is a 24 VDC DC axial fan in a 40 × 40 × 28 mm frame. 13100 W input is the defining electrical load in the supplied data. During cooling-margin review, compare the model's acoustic value. Check the full suffix before confirming connector details.

GF60151B8-1E000-AE9 SUNON Axial Fan

Product Features

Product Features

Low Noise Cooling

Application Industry

Server Cooling

Storage Systems

Edge Computing

Data Center Equipment

Frequently Asked Questions

What input power is listed for GF60151B8-1E000-AE9?

What certification information is listed for GF60151B8-1E000-AE9?

Which selection data still require confirmation for GF60151B8-1E000-AE9?

Is GF60151B8-1E000-AE9 compatible with a replacement fan?

Why choose GF60151B8-1E000-AE9 over a general cooling fan?

What noise data are available for GF60151B8-1E000-AE9?

Related Products

GF40282B3-10000-SDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-QDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-AEP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

GF40282B3-10000-ADP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

GF40282B2-10000-SDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

GF40282B2-10000-QDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

Message Form