GF80251B1-0000-AE9 SUNON Axial Fan

Brand :: SUNON

Model:: GF80251B1-0000-AE9 | SUNON 12V 3.96W 80x80x25mm 101.9m3/h 4800rpm DC Axial Fan for New Energy

Type:: Axial Fans

Industry:: New Energy

Description:: Within inverters, energy-storage systems, and charging equipment, SUNON GF80251B1-0000-AE9 serves as a 80 × 80 × 25 mm DC axial fan operating at 12 VDC. 102.1 Pa maximum pressure is the standout documented duty-point value. During fan selection, compare the model's pressure capability. Use current model documentation to validate protection choices.

Datasheet:: GF80251B1-0000-AE9 | SUNON 12V 3.96W 80x80x25mm 101.9m3/h 4800rpm DC Axial Fan for New Energy Datasheet (Pdf)

Product Features

Rated Voltage(V)	12
Size(mm)	80x80x25mm
Max.Air Flow(m³/h)	101.9
Max.Pressure(Pa)	102.1
Input Power(W)	3.96
Speed(rpm)	4800
Noise(db)	47.5

Product Features

Reliable Fan Cooling

SUNON GF80251B1-0000-AE9 supports new-energy power equipment with DC brushless axial fan airflow. It is intended for installations where predictable air exchange is central to equipment stability.

The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. The enclosure should direct air across the heat source because bypass flow can reduce cooling even when the fan runs normally.

A dependable GF80251B1-0000-AE9 installation starts with a review of exhaust separation. Complete maintenance planning before design lock to confirm compatibility, operating margin and the information needed for repeat orders. Define cleaning and inspection intervals around the actual duty cycle.

Application Industry

Energy Storage

SUNON GF80251B1-0000-AE9 serves energy-storage systems. Airflow around battery-control and power-conversion assemblies helps address charging and discharging losses. The fan gives OEM equipment a defined air route and supports stable ESS operation. It supports reliable equipment cooling.

PV Inverters

SUNON GF80251B1-0000-AE9 serves photovoltaic inverters. Airflow around switching devices and control electronics helps address solar power-conversion heat. The fan gives OEM equipment a defined air route and supports dependable inverter duty. It supports reliable equipment cooling.

EV Charging

SUNON GF80251B1-0000-AE9 serves electric-vehicle charging equipment. Airflow around power modules and control assemblies helps address high charging loads. The fan gives OEM equipment a defined air route and supports reliable charging operation. It supports reliable equipment cooling.

Frequently Asked Questions

Is GF80251B1-0000-AE9 suitable for continuous operation?

The supplied product-line reference discusses long-life cooling, but continuous-duty limits for this full suffix must be verified from its datasheet and operating conditions.

What bearing information is confirmed for GF80251B1-0000-AE9?

The exact bearing option is not confirmed by the row-level data. Check the complete suffix in the current SUNON specification.

Which performance figures define GF80251B1-0000-AE9?

Use the listed voltage, size, 101.9 m³/h airflow, 4800 rpm, and 3.96 W input for preliminary comparison.

Can GF80251B1-0000-AE9 serve high-reliability cooling systems?

Assess reliability from the exact bearing, temperature, protection, and life data. The supplied series note alone does not confirm every suffix-specific option.

Which selection data still require confirmation for GF80251B1-0000-AE9?

Confirm any missing bearing, connector, control, IP rating, life, certification, and performance-curve details for the complete part number.

Does GF80251B1-0000-AE9 support speed control?

Speed-control capability is not stated for this complete part number. Confirm the signal and controller requirements before use.

Related Products

GF40282B3-10000-SDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

Within servers and data-center electronics, SUNON GF40282B3-10000-SDP serves as a 40 × 40 × 28 mm DC axial fan operating at 24 VDC. 10500 W input is the defining electrical load in the supplied data. For cooling-margin review, start with the supplied frame geometry. Check the full suffix before confirming connector details.

GF40282B3-10000-QDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-QDP addresses servers and data-center electronics through a 24 VDC DC axial fan platform measuring 40 × 40 × 28 mm. 10500 W input is the defining electrical load in the supplied data. Use the documented cooling output when planning cooling-margin review. Check the full suffix before confirming connector details.

GF40282B3-10000-AEP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

The GF40282B3-10000-AEP is SUNON's 24 VDC, 40 × 40 × 28 mm DC axial fan option for servers and data-center electronics. Its 500 rpm rating defines a lower-speed operating point. Review its operating point during cooling-margin review. Check the full suffix before confirming connector details.

GF40282B3-10000-ADP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

SUNON configures GF40282B3-10000-ADP as a 40 × 40 × 28 mm DC axial fan for servers and data-center electronics, operating at 24 VDC. Its 500 rpm rating defines a lower-speed operating point. Treat the pressure capability as a primary input to cooling-margin review. Check the full suffix before confirming connector details.

GF40282B2-10000-SDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

SUNON GF40282B2-10000-SDP combines a 40 × 40 × 28 mm DC axial fan platform with a 24 VDC rating for servers and data-center electronics. 13100 W input is the defining electrical load in the supplied data. Base cooling-margin review on the stated dimensional envelope. Check the full suffix before confirming connector details.

GF40282B2-10000-QDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

Applied in servers and data-center electronics, SUNON GF40282B2-10000-QDP is a 24 VDC DC axial fan in a 40 × 40 × 28 mm frame. 13100 W input is the defining electrical load in the supplied data. During cooling-margin review, compare the model's acoustic value. Check the full suffix before confirming connector details.

GF80251B1-0000-AE9 SUNON Axial Fan

Product Features

Product Features

Reliable Fan Cooling

Application Industry

Energy Storage

PV Inverters

EV Charging

Frequently Asked Questions

Is GF80251B1-0000-AE9 suitable for continuous operation?

What bearing information is confirmed for GF80251B1-0000-AE9?

Which performance figures define GF80251B1-0000-AE9?

Can GF80251B1-0000-AE9 serve high-reliability cooling systems?

Which selection data still require confirmation for GF80251B1-0000-AE9?

Does GF80251B1-0000-AE9 support speed control?

Related Products

GF40282B3-10000-SDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-QDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-AEP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

GF40282B3-10000-ADP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

GF40282B2-10000-SDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

GF40282B2-10000-QDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

Message Form