GF80251B6-000U-AE9 SUNON Axial Fan

Brand :: SUNON

Model:: GF80251B6-000U-AE9 | SUNON 12V 1.44W 80x80x25mm 62.9m3/h DC Axial Fan for Industrial Cooling

Type:: Axial Fans

Industry:: Industrial Cooling

Description:: Within servers and data-center electronics, SUNON GF80251B6-000U-AE9 serves as a 80 × 80 × 25 mm DC axial fan operating at 12 VDC. Its 2900 rpm rating defines a lower-speed operating point. For thermal validation, start with the supplied equipment fit. Review connector, alarm, and sensor options separately.

Datasheet:: GF80251B6-000U-AE9 | SUNON 12V 1.44W 80x80x25mm 62.9m3/h DC Axial Fan for Industrial Cooling Datasheet (Pdf)

Product Features

Rated Voltage(V)	12
Size(mm)	80x80x25mm
Max.Air Flow(m³/h)	62.9
Max.Pressure(Pa)	37.4
Input Power(W)	1.44
Speed(rpm)	2900
Noise(db)	30

Product Features

Reliable Fan Cooling

Equipment builders can integrate SUNON GF80251B6-000U-AE9, a DC brushless axial fan, into industrial equipment. The design supplies the air movement required to carry component heat out of confined spaces.

With up to 62.9 m3/h listed airflow, the fan provides a measurable starting point for thermal design. Clear inlet space and a controlled outlet help preserve useful flow. The matching document lists IP68 protection, providing a defined basis for environmental exposure review.

Design approval for GF80251B6-000U-AE9 should cover cable routing together with prototype trials before ordering. This creates a practical link between thermal validation, purchasing documentation and future servicing. Use a representative assembly rather than an unrestricted bench setup.

Application Industry

Industrial Equipment

SUNON GF80251B6-000U-AE9 serves industrial machinery and electronic equipment. Airflow around controllers, drives and power devices helps address continuous internal heat. The fan gives OEM equipment a defined air route and supports stable equipment operation.

Frequently Asked Questions

What should be checked if GF80251B6-000U-AE9 stops?

Verify supply, wiring, obstructions, impeller movement, and protection status. Use the model datasheet before replacement or repair.

Does GF80251B6-000U-AE9 have a documented pressure rating?

Yes. The worksheet lists up to 37.4 Pa; compare it with the system curve.

What input power is listed for GF80251B6-000U-AE9?

The worksheet lists 1.44 W input. Check supply capacity and operating conditions before commissioning.

What equipment can use GF80251B6-000U-AE9?

It is listed for servers and data-center electronics. Check dimensions, airflow, pressure, and the installation environment against the actual equipment.

How is GF80251B6-000U-AE9 electrically connected?

The supplied row does not state the connector or lead configuration. Follow the model-specific wiring drawing.

Does GF80251B6-000U-AE9 support speed control?

Speed-control capability is not stated for this complete part number. Confirm the signal and controller requirements before use.

Related Products

GF60151B9-1E00U-AE9 | SUNON 12V 0.39W 60x60x15mm 18m3/h DC Axial Fan for Industrial Cooling

SUNON configures GF60151B9-1E00U-AE9 as a 60 × 60 × 15 mm DC axial fan for servers and data-center electronics, operating at 12 VDC. A listed input of 0.39 W is the model's notable electrical characteristic. Base cabinet ventilation planning on the stated performance curve. Verify bearing and signal options in the exact datasheet.

GF92251B3-000U-AE9 | SUNON 12V 2.76W 92x92x25mm 110.4m3/h DC Axial Fan for Industrial Cooling

Within servers and data-center electronics, SUNON GF92251B3-000U-AE9 serves as a 92 × 92 × 25 mm DC axial fan operating at 12 VDC. Up to 110.4 m³/h is its most prominent listed performance figure. During thermal validation, compare the model's frame geometry. Review connector, alarm, and sensor options separately.

GF40282B3-10000-SDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

Within servers and data-center electronics, SUNON GF40282B3-10000-SDP serves as a 40 × 40 × 28 mm DC axial fan operating at 24 VDC. 10500 W input is the defining electrical load in the supplied data. For cooling-margin review, start with the supplied frame geometry. Check the full suffix before confirming connector details.

GF40282B3-10000-QDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-QDP addresses servers and data-center electronics through a 24 VDC DC axial fan platform measuring 40 × 40 × 28 mm. 10500 W input is the defining electrical load in the supplied data. Use the documented cooling output when planning cooling-margin review. Check the full suffix before confirming connector details.

GF40282B3-10000-AEP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

The GF40282B3-10000-AEP is SUNON's 24 VDC, 40 × 40 × 28 mm DC axial fan option for servers and data-center electronics. Its 500 rpm rating defines a lower-speed operating point. Review its operating point during cooling-margin review. Check the full suffix before confirming connector details.

GF40282B3-10000-ADP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

SUNON configures GF40282B3-10000-ADP as a 40 × 40 × 28 mm DC axial fan for servers and data-center electronics, operating at 24 VDC. Its 500 rpm rating defines a lower-speed operating point. Treat the pressure capability as a primary input to cooling-margin review. Check the full suffix before confirming connector details.

GF80251B6-000U-AE9 SUNON Axial Fan

Product Features

Product Features

Reliable Fan Cooling

Application Industry

Industrial Equipment

Frequently Asked Questions

What should be checked if GF80251B6-000U-AE9 stops?

Does GF80251B6-000U-AE9 have a documented pressure rating?

What input power is listed for GF80251B6-000U-AE9?

What equipment can use GF80251B6-000U-AE9?

How is GF80251B6-000U-AE9 electrically connected?

Does GF80251B6-000U-AE9 support speed control?

Related Products

GF60151B9-1E00U-AE9 | SUNON 12V 0.39W 60x60x15mm 18m3/h DC Axial Fan for Industrial Cooling

GF92251B3-000U-AE9 | SUNON 12V 2.76W 92x92x25mm 110.4m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-SDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-QDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-AEP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

GF40282B3-10000-ADP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

Message Form