

The 24 VDC SUNON GF92382BX-10000-AEP is a DC axial fan sized 92 × 92 × 38 mm for inverters, energy-storage systems, and charging equipment. Up to 293.8 m³/h is its most prominent listed performance figure. Use the documented installation footprint when planning spares assessment. Confirm control inputs against the complete ordering code.
| Rated Voltage(V) | 24 |
|---|---|
| Size(mm) | 92x92x38mm |
| Max.Air Flow(m³/h) | 293.8 |
| Max.Pressure(Pa) | 430.9 |
| Input Power(W) | 40.8 |
| Speed(rpm) | 9000 |
| Noise(db) | 66.8 |
SUNON GF92382BX-10000-AEP brings active air movement to new-energy power equipment. This DC brushless axial fan helps equipment designers control thermal conditions around densely arranged parts.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. Correct airflow direction and inlet clearance help translate the documented operating point into reliable equipment-level cooling.
GF92382BX-10000-AEP is best integrated with attention to grille resistance. Engineering teams can use power-budget review during sourcing review to verify thermal suitability and give buyers an auditable selection basis. Account for the pressure loss introduced by guards and protective screens.
SUNON GF92382BX-10000-AEP serves energy-storage systems. Airflow around battery-control and power-conversion assemblies helps address charging and discharging losses. The fan gives OEM equipment a defined air route and supports stable ESS operation. It supports reliable equipment cooling.
SUNON GF92382BX-10000-AEP serves photovoltaic inverters. Airflow around switching devices and control electronics helps address solar power-conversion heat. The fan gives OEM equipment a defined air route and supports dependable inverter duty. It supports reliable equipment cooling.
SUNON GF92382BX-10000-AEP serves electric-vehicle charging equipment. Airflow around power modules and control assemblies helps address high charging loads. The fan gives OEM equipment a defined air route and supports reliable charging operation. It supports reliable equipment cooling.
It is listed for inverters, energy-storage systems, and charging equipment. Check dimensions, airflow, pressure, and the installation environment against the actual equipment.
The exact IP or protection option is not stated in the supplied row. Confirm the full suffix in the applicable SUNON datasheet.
Inspect for dust, blocked airflow, abnormal noise, loose mounting, and wiring damage. Isolate power before cleaning or service.
Stock and lead time can change. Confirm the exact suffix, quantity, and delivery date with the supplier before ordering.
The worksheet lists 66.8 dB. Installation distance, airflow resistance, and enclosure acoustics can change the measured result.

The GF40282B3-10000-AEP is SUNON's 24 VDC, 40 × 40 × 28 mm DC axial fan option for servers and data-center electronics. Its 500 rpm rating defines a lower-speed operating point. Review its operating point during cooling-margin review. Check the full suffix before confirming connector details.
Read More
Within servers and data-center electronics, SUNON GF40282B2-10000-AEP serves as a 40 × 40 × 28 mm DC axial fan operating at 24 VDC. 276.5 Pa maximum pressure is the standout documented duty-point value. The recorded electrical load should guide cooling-margin review. Check the full suffix before confirming connector details.
Read More
SUNON GF40282B1-10000-AEP combines a 40 × 40 × 28 mm DC axial fan platform with a 24 VDC rating for servers and data-center electronics. 343.7 Pa maximum pressure is the standout documented duty-point value. Treat the technical profile as a primary input to cabinet ventilation planning. Verify bearing and signal options in the exact datasheet.
Read More
Used in servers and data-center electronics, SUNON GF40282BX-10000-ADP is a 24 VDC DC axial fan in a 40 × 40 × 28 mm frame. 500.7 Pa maximum pressure is the standout documented duty-point value. The recorded power demand should guide cooling-margin review. Check the full suffix before confirming connector details.
Read More
Within servers and data-center electronics, SUNON GF40282B3-10000-SDP serves as a 40 × 40 × 28 mm DC axial fan operating at 24 VDC. 10500 W input is the defining electrical load in the supplied data. For cooling-margin review, start with the supplied frame geometry. Check the full suffix before confirming connector details.
Read More
GF40282B3-10000-QDP addresses servers and data-center electronics through a 24 VDC DC axial fan platform measuring 40 × 40 × 28 mm. 10500 W input is the defining electrical load in the supplied data. Use the documented cooling output when planning cooling-margin review. Check the full suffix before confirming connector details.
Read More