GF80321B2-0000-AE9 SUNON Axial Fan

Brand :: SUNON

Model:: GF80321B2-0000-AE9 | SUNON 12V 2.76W 80x80x32mm 95m3/h DC Axial Fan for Data Center Cooling

Type:: Axial Fans

Industry:: Data Center Cooling

Description:: SUNON GF80321B2-0000-AE9 combines a 80 × 80 × 32 mm DC axial fan platform with a 12 VDC rating for servers and data-center electronics. Up to 95 m³/h is its most prominent listed performance figure. The recorded installation footprint should guide fan selection. Use current model documentation to validate protection choices.

Datasheet:: GF80321B2-0000-AE9 | SUNON 12V 2.76W 80x80x32mm 95m3/h DC Axial Fan for Data Center Cooling Datasheet (Pdf)

Product Features

Rated Voltage(V)	12
Size(mm)	80x80x32mm
Max.Air Flow(m³/h)	95
Max.Pressure(Pa)	79.7
Input Power(W)	2.76
Speed(rpm)	4500
Noise(db)	43.1

Product Features

Reliable Fan Cooling

For server and data-center equipment, SUNON GF80321B2-0000-AE9 serves as a DC brushless axial fan. The fan supports temperature control in equipment that runs through sustained or repeated duty cycles.

The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. The enclosure should direct air across the heat source because bypass flow can reduce cooling even when the fan runs normally.

GF80321B2-0000-AE9 is best integrated with attention to grille resistance. Engineering teams can use thermal-load testing during sourcing review to verify thermal suitability and give buyers an auditable selection basis. Compare installed temperatures at representative equipment loads.

Application Industry

Server Cooling

SUNON GF80321B2-0000-AE9 serves server platforms. Airflow around processors, memory and power components helps address sustained computing loads. The fan gives OEM equipment a defined air route and supports stable server operation. It supports reliable equipment cooling.

Storage Systems

SUNON GF80321B2-0000-AE9 serves storage equipment. Airflow around drives, controllers and power assemblies helps address continuous data workloads. The fan gives OEM equipment a defined air route and supports reliable storage availability. It supports reliable equipment cooling.

Edge Computing

SUNON GF80321B2-0000-AE9 serves edge-computing systems. Airflow around compact processing and communication modules helps address high heat density. The fan gives OEM equipment a defined air route and supports consistent thermal control. It supports reliable equipment cooling.

Data Center Equipment

SUNON GF80321B2-0000-AE9 serves data-center equipment. Airflow around critical computing assemblies helps address round-the-clock heat generation. The fan gives OEM equipment a defined air route and supports infrastructure availability. It supports reliable equipment cooling.

Frequently Asked Questions

What maintenance is recommended for GF80321B2-0000-AE9?

Inspect for dust, blocked airflow, abnormal noise, loose mounting, and wiring damage. Isolate power before cleaning or service.

How should buyers confirm availability of GF80321B2-0000-AE9?

Stock and lead time can change. Confirm the exact suffix, quantity, and delivery date with the supplier before ordering.

What voltage is required by GF80321B2-0000-AE9?

The listed rating is 12 VDC. Verify polarity or mains frequency, wiring, and protection before commissioning.

Is GF80321B2-0000-AE9 suitable for continuous operation?

The supplied product-line reference discusses long-life cooling, but continuous-duty limits for this full suffix must be verified from its datasheet and operating conditions.

What bearing information is confirmed for GF80321B2-0000-AE9?

The exact bearing option is not confirmed by the row-level data. Check the complete suffix in the current SUNON specification.

What input power is listed for GF80321B2-0000-AE9?

The worksheet lists 2.76 W input. Check supply capacity and operating conditions before commissioning.

Related Products

GF40282B3-10000-SDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

Within servers and data-center electronics, SUNON GF40282B3-10000-SDP serves as a 40 × 40 × 28 mm DC axial fan operating at 24 VDC. 10500 W input is the defining electrical load in the supplied data. For cooling-margin review, start with the supplied frame geometry. Check the full suffix before confirming connector details.

GF40282B3-10000-QDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-QDP addresses servers and data-center electronics through a 24 VDC DC axial fan platform measuring 40 × 40 × 28 mm. 10500 W input is the defining electrical load in the supplied data. Use the documented cooling output when planning cooling-margin review. Check the full suffix before confirming connector details.

GF40282B3-10000-AEP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

The GF40282B3-10000-AEP is SUNON's 24 VDC, 40 × 40 × 28 mm DC axial fan option for servers and data-center electronics. Its 500 rpm rating defines a lower-speed operating point. Review its operating point during cooling-margin review. Check the full suffix before confirming connector details.

GF40282B3-10000-ADP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

SUNON configures GF40282B3-10000-ADP as a 40 × 40 × 28 mm DC axial fan for servers and data-center electronics, operating at 24 VDC. Its 500 rpm rating defines a lower-speed operating point. Treat the pressure capability as a primary input to cooling-margin review. Check the full suffix before confirming connector details.

GF40282B2-10000-SDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

SUNON GF40282B2-10000-SDP combines a 40 × 40 × 28 mm DC axial fan platform with a 24 VDC rating for servers and data-center electronics. 13100 W input is the defining electrical load in the supplied data. Base cooling-margin review on the stated dimensional envelope. Check the full suffix before confirming connector details.

GF40282B2-10000-QDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

Applied in servers and data-center electronics, SUNON GF40282B2-10000-QDP is a 24 VDC DC axial fan in a 40 × 40 × 28 mm frame. 13100 W input is the defining electrical load in the supplied data. During cooling-margin review, compare the model's acoustic value. Check the full suffix before confirming connector details.

GF80321B2-0000-AE9 SUNON Axial Fan

Product Features

Product Features

Reliable Fan Cooling

Application Industry

Server Cooling

Storage Systems

Edge Computing

Data Center Equipment

Frequently Asked Questions

What maintenance is recommended for GF80321B2-0000-AE9?

How should buyers confirm availability of GF80321B2-0000-AE9?

What voltage is required by GF80321B2-0000-AE9?

Is GF80321B2-0000-AE9 suitable for continuous operation?

What bearing information is confirmed for GF80321B2-0000-AE9?

What input power is listed for GF80321B2-0000-AE9?

Related Products

GF40282B3-10000-SDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-QDP | SUNON 24V 10500W 40x40x28mm 25m3/h DC Axial Fan for Industrial Cooling

GF40282B3-10000-AEP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

GF40282B3-10000-ADP | SUNON 24V 40x40x28mm 24m3/h 500rpm DC Axial Fan for Data Center Cooling

GF40282B2-10000-SDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

GF40282B2-10000-QDP | SUNON 24V 13100W 40x40x28mm 31.1m3/h DC Axial Fan for Industrial Cooling

Message Form